Schneider Electric

LV848286

LV848286 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for LV848286 Schneider Electric

LV848286 Schneider Electric - Circuit breaker Masterpact MTZ2 20N1, 2000 A, 3P drawout, without Micrologic

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£2,141.45 Exc. VAT
£2,569.74 Inc. VAT

Main

Range MasterPacT
Product name MasterPact MTZ2
Device short name MTZ2 20 N1
product or component type Circuit breaker
device application Power distribution protection
Poles description 3P
Control unit Without control unit
Product compatibility control unit MicroLogic 2.0 X, control unit MicroLogic 5.0 X, control unit MicroLogic 6.0 X, control unit MicroLogic 7.0 X, control unit MicroLogic 2.0 Xi, control unit MicroLogic 5.0 Xi, control unit MicroLogic 6.0 Xi, control unit MicroLogic 7.0 Xi
[In] rated current 2000 A at 40 °C
Performance type N1 42 kA 415 V AC
[Ue] rated operational voltage 690 V AC 50/60 Hz
Suitability for isolation Yes conforming to EN/IEC 60947-2
Selectivity category Category B
Control type Push-button
mounting mode Drawout

Complementary

[Icu] rated ultimate short-circuit breaking capacity 42 kA at 220/415 V AC 50/60 Hz,42 kA at 440 V AC 50/60 Hz,42 kA at 500/525 V AC 50/60 Hz,42 kA at 660/690 V AC 50/60 Hz
[Ics] rated service breaking capacity 42 kA at 220/415 V AC 50/60 Hz,42 kA at 440 V AC 50/60 Hz,42 kA at 500/525 V AC 50/60 Hz,42 kA at 660/690 V AC 50/60 Hz
[Icw] rated short-time withstand current 42 kA 0.5 s,42 kA 1 s,22 kA 3 s
[Icm] rated short-circuit making capacity 88 kA 220/415 V AC at 50/60 Hz,88 kA 440 V AC at 50/60 Hz,88 kA 500/525 V AC at 50/60 Hz,88 kA 660/690 V AC at 50/60 Hz
Sensor rating 1000 A,1250 A,1600 A,2000 A
[Ui] rated insulation voltage 1000 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage 12 kV
Power dissipation in W 470 W
Maximum breaking time 25 ms
Maximum closing response time 70 ms
mounting support Rails,Base plate
Upside connection Front,Rear
Downside connection Front,Rear
Connection pitch 115 mm
Mechanical durability 20000 cycles with periodic preventive maintenance
Electrical durability AC-3: 6000 cycles 440/690 V AC 50/60 Hz conforming to EN/IEC 60947-3,6000 cycles 690 V AC 50/60 Hz conforming to EN/IEC 60947-2,8000 cycles 440 V AC 50/60 Hz conforming to EN/IEC 60947-2,AC-23A: 6000 cycles 690 V AC 50/60 Hz conforming to EN/IEC 60947-3,AC-23A: 8000 cycles 440 V AC 50/60 Hz conforming to EN/IEC 60947-3
Height Drawout circuit breaker with chassis: 439 mm,Drawout circuit breaker without chassis: 300 mm
Width Drawout circuit breaker with chassis: 441 mm,Drawout circuit breaker without chassis: 378 mm
Depth Drawout circuit breaker with chassis: 403 mm,Drawout circuit breaker without chassis: 300 mm
net weight 90 kg
Standards EN/IEC 60947-1,EN/IEC 60947-2,EN/IEC 60947-2 Annex H,IEC 61557-12
Product certifications CE,IECEE CB Scheme

Environment

IP degree of protection IP30 conforming to EN 60529
Pollution degree 3 conforming to IEC 60947-1
Ambient air temperature for operation -25…70 °C
Ambient air temperature for storage -40…85 °C
Operating altitude 0...2000 m without derating,2000...5000 m with derating

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 30.5 cm
Package 1 Width 29.5 cm
Package 1 Length 37.5 cm
Package 1 Weight 48.422 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

CAD

Environmental disclosure