This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Allen Bradley

440G-TZS21UPRH

Allen Bradley

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for 440G-TZS21UPRH Allen Bradley

440G-TZS21UPRH Allen Bradley - Guardmaster TLS-Z GD2 Guardlock Switch

Extended Description for 440G-TZS21UPRH Allen Bradley

440G-TZS21UPRH Allen Bradley - Guard Locking Switch - 440G TLS-Z GD2: Power to Release, Solenoid Voltage: 24V AC/DC, Solenoid Contacts: None, Contacts(Safety and Aux): 2 x PNP (0.2A max.), 1 x PNP (0.2A max.) - Lock status, Actuator: Fully-Flex, Conduit Entry: 8-Pin Micro (M12)

Free Delivery to UK Mainland on orders over £25

Product Detail

Ambient temperature during operating -10...60 °C
Clamping force 2000 N
Coating housing Uncoated
Explosion safety category for dust None
Explosion safety category for gas None
Height of sensor 126 mm
IP-rating IP67
Length of sensor 33 mm
Material housing Plastic
Number of contacts as normally closed contact 2
Number of contacts as normally open contact 1
Rated control supply voltage Us magnet drive at DC 24...24 V
Rated operation current Ie at DC-13, 24 V 0.2 A
Suitable for safety functions yes
Type of electric plug connection Connector M12
Type of guard locking Quiescent current principle
Type of switching contact Other
Width sensor 92 mm
With auxiliary release yes
With escape unlocking no
With status indication yes

Documentation

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible