This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Phoenix Contact

0707086

0707086 Phoenix Contact

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for 0707086 Phoenix Contact

0707086 Phoenix Contact - Panel feed-through terminal block - HDFK 4 - 0707086

Extended Description for 0707086 Phoenix Contact

0707086 Phoenix Contact - Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Screw connection with tension sleeve, number of positions: 1, load current: 32 A, cross section: 0.2 mm² - 6 mm², connection direction of the conductor to plug-in direction: 0 °, width: 8.1 mm, color: gray

Free Delivery to UK Mainland on orders over £25

Connection capacity, external

Internal cylindrical gage A4
2 conductors with same cross section, solid 0.2 mm² - 1.5 mm²
Torque 0.6 Nm - 0.8 Nm
Conductor cross section flexible 0.2 mm² - 4 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² - 1.5 mm²
Connection method Screw connection with tension sleeve
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² - 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² - 4 mm²
Stripping length 9 mm
2 conductors with same cross section, flexible 0.2 mm² - 1.5 mm²
Conductor cross section solid 0.2 mm² - 6 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² - 4 mm²
Connection direction of the conductor to plug-in direction 0 °

General product information

Type of note Notes on safety
Note The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness.

Connection capacity, internal

2 conductors with same cross section, flexible 0.2 mm² - 1.5 mm²
Connection method Screw connection with tension sleeve
Conductor cross section solid 0.2 mm² - 6 mm²
Stripping length 9 mm
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² - 2.5 mm²
Internal cylindrical gage A4
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² - 4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² - 4 mm²
Torque 0.6 Nm - 0.8 Nm
2 conductors with same cross section, solid 0.2 mm² - 1.5 mm²
Connection direction of the conductor to plug-in direction 0 °
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² - 1.5 mm²
Conductor cross section flexible 0.2 mm² - 4 mm²

Material data - housing

CTI according to IEC 60112 600
Housing color gray (7042)
Insulating material group I
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Insulating material PA
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850

Electrical tests

Conductor cross section 4 mm²
Rated current 32 A

Standards and Regulations

Connection in acc. with standard IEC / EN
Connection in acc. with standard IEC 60947-7-1
Connection in acc. with standard CSA
Flammability rating according to UL 94 V0

Electrical parameters

Rated surge voltage (III/3) 6 kV
Nominal current 32 A
Nom. voltage 400 V (With metal panels of 1 mm - 2.5 mm)
Rated voltage 400 V

Dimensions for the product

Width [ w ] 8.1 mm
Pitch 8.1 mm
Height [ h ] 21 mm

Item properties

Range of articles HDFK 4
Number of connections 2
Connection method Screw connection with tension sleeve
Number of potentials 1
Number of positions 1
Brief article description Panel feed-through terminal block
Pitch 8.1 mm

Packaging information

Denomination packing units Pcs.
Pieces per package 50

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'
China RoHS Environmentally Friendly Use Period = 50 years

Air clearances and creepage distances

Specification IEC 60947-7-1:2002-07
Application Metal wall 1.0 mm - 2.5 mm
Clearances and creepage distances Metal wall 1.0 mm - 2.5 mm IEC 60947-7-1:2002-07
Minimum creepage distance value (III/3) 5.5 mm
Minimum clearance - inhomogeneous field (III/3) 5.5 mm

Material data - contact

Contact material Cu alloy
Surface characteristics tin-plated
Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details