This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Phoenix Contact

0709026

0709026 Phoenix Contact

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for 0709026 Phoenix Contact

0709026 Phoenix Contact - Panel feed-through terminal block - HDFKV 4 - 0709026

Extended Description for 0709026 Phoenix Contact

0709026 Phoenix Contact - Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Screw connection with tension sleeve, number of positions: 1, load current: 32 A, cross section: 0.2 mm² - 6 mm², connection direction of the conductor to plug-in direction: -90 °, width: 8.1 mm, color: gray

Free Delivery to UK Mainland on orders over £25

Connection capacity, internal

2 conductors with same cross section, flexible 0.2 mm² - 1.5 mm²
Conductor cross section flexible 0.2 mm² - 4 mm²
2 conductors with same cross section, solid 0.2 mm² - 1.5 mm²
Connection direction of the conductor to plug-in direction -90 °
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² - 1.5 mm²
Internal cylindrical gage A4
Connection method Screw connection with tension sleeve
Stripping length 9 mm
Torque 0.6 Nm - 0.8 Nm
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² - 4 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² - 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² - 4 mm²
Conductor cross section solid 0.2 mm² - 6 mm²

Pull-out test

Conductor cross section / conductor type / tensile force 0.2 mm² / flexible / > 10 N
Pull-out test Test passed
Conductor cross section / conductor type / tensile force 6 mm² / solid / > 80 N
Pull-out test IEC 60947-7-1:2002-07
Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N
Conductor cross section / conductor type / tensile force 4 mm² / flexible / > 60 N

Item properties

Pitch 8.1 mm
Number of potentials 1
Range of articles HDFKV 4
Number of positions 1
Brief article description Panel feed-through terminal block
Connection method Screw connection with tension sleeve
Number of connections 2

Electrical parameters

Rated voltage 400 V
Nominal current 32 A
Nom. voltage 400 V (With metal panels of 1 mm - 2.5 mm)
Rated surge voltage (III/3) 6 kV

Vibration test

Result Test passed
Amplitude 0.35 mm (10 - 60.1 Hz)
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Acceleration 5 g (60.1 - 150 Hz)
Specification IEC 60068-2-6:1995-03
Test duration per axis 2.5 h

Connection capacity, external

Stripping length 9 mm
Conductor cross section solid 0.2 mm² - 6 mm²
Torque 0.6 Nm - 0.8 Nm
Connection method Screw connection with tension sleeve
Conductor cross section flexible 0.2 mm² - 4 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² - 1.5 mm²
2 conductors with same cross section, solid 0.2 mm² - 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² - 4 mm²
Connection direction of the conductor to plug-in direction -90 °
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² - 2.5 mm²
2 conductors with same cross section, flexible 0.2 mm² - 1.5 mm²
Internal cylindrical gage A4
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² - 4 mm²

Environmental Product Compliance

China RoHS For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'
China RoHS Environmentally Friendly Use Period = 50 years
REACh SVHC Lead 7439-92-1

Material data - housing

Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
CTI according to IEC 60112 600
Housing color gray (7042)
Insulating material PA
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Insulating material group I
Temperature for the ball pressure test according to EN 60695-10-2 125 °C

Current carrying capacity / derating curves

Specification IEC 60947-7-1 (in parts)

Dimensions for the product

Width [ w ] 8.1 mm
Pitch 8.1 mm
Height [ h ] 21 mm

Termination and connection method

Test for conductor damage and slackening Test passed
Test for conductor damage and slackening IEC 60947-7-1:2002-07

Air clearances and creepage distances

Minimum creepage distance value (III/3) 5.5 mm
Clearances and creepage distances Metal wall 1.0 mm - 2.5 mm IEC 60947-7-1:2002-07
Specification IEC 60947-7-1:2002-07
Application Metal wall 1.0 mm - 2.5 mm
Minimum clearance - inhomogeneous field (III/3) 5.5 mm

General product information

Note The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness.
Type of note Notes on safety

Electrical tests

Rated current 32 A
Conductor cross section 4 mm²

Material data - contact

Surface characteristics tin-plated
Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy

Temperature-rise test

Result Test passed
Specification IEC 60947-7-1:2002-07

Standards and Regulations

Flammability rating according to UL 94 V0
Connection in acc. with standard CSA
Connection in acc. with standard IEC 60947-7-1

Packaging information

Denomination packing units Pcs.
Pieces per package 50

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details