This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Phoenix Contact

0709534

0709534 Phoenix Contact

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for 0709534 Phoenix Contact

0709534 Phoenix Contact - Phoenix Contact Terminal Block, 232A, 25 ? 95 mm² Wire, Screw Termination

Free Delivery to UK Mainland on orders over £25

Electrical parameters

Nominal current 232 A
Rated voltage 1000 V
Nom. voltage 1000 V (With metal panels of 1 mm - 2.5 mm)
Rated surge voltage (III/3) 8 kV

Air clearances and creepage distances

Minimum clearance - inhomogeneous field (III/3) 8 mm
Application Metal wall 1.0 mm - 2.5 mm
Minimum creepage distance value (III/3) 12.5 mm
Clearances and creepage distances Metal wall 1.0 mm - 2.5 mm IEC 60947-7-1:2009-04
Specification IEC 60947-7-1:2009-04

Material data - housing

Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Flammability rating according to UL 94 V0
Insulating material PA
Glow wire flammability index GWFI according to EN 60695-2-12 850
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
CTI according to IEC 60112 600
Housing color gray (7042)
Insulating material group I

Connection capacity, external

Connection method Screw connection with tension sleeve
Internal cylindrical gage B12
2 conductors with same cross section, flexible 16 mm² - 35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 25 mm² - 95 mm²
Stripping length 27 mm
Conductor cross section flexible 35 mm² - 95 mm²
Connection direction of the conductor to plug-in direction 0 °
Torque 15 Nm - 20 Nm
2 conductors with same cross section, solid 16 mm² - 35 mm²
Conductor cross section solid 25 mm² - 95 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 16 mm² - 35 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 25 mm² - 95 mm²

Standards and Regulations

Connection in acc. with standard CSA
Flammability rating according to UL 94 V0
Connection in acc. with standard IEC 60947-7-1

Dimensions for the product

Length [ l ] 95.4 mm
Height [ h ] 74 mm
Width [ w ] 25 mm
Pitch 25 mm

Connection capacity, internal

Torque 15 Nm - 20 Nm
Stripping length 27 mm
Conductor cross section flexible 35 mm² - 95 mm²
Connection method Screw connection with tension sleeve
Conductor cross section flexible, with ferrule without plastic sleeve 25 mm² - 95 mm²
Connection direction of the conductor to plug-in direction 0 °
2 conductors with same cross section, flexible 16 mm² - 35 mm²
Conductor cross section solid 25 mm² - 95 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 25 mm² - 95 mm²
2 conductors with same cross section, solid 16 mm² - 35 mm²
Internal cylindrical gage B12
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 16 mm² - 35 mm²

Item properties

Brief article description Panel feed-through terminal block
Number of connections 2
Connection method Screw connection with tension sleeve
Number of potentials 1
Number of positions 1
Pitch 25 mm
Range of articles HDFK 95

Environmental Product Compliance

China RoHS For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'
China RoHS Environmentally Friendly Use Period = 50 years
REACh SVHC Lead 7439-92-1

Packaging information

Denomination packing units Pcs.
Pieces per package 10

Electrical tests

Conductor cross section 95 mm²
Rated current 232 A

General product information

Note The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness.
Type of note Notes on safety

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Surface characteristics tin-plated
Contact material Cu alloy

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details