This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

15533

15533 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for 15533 Schneider Electric

15533 Schneider Electric - PRD1 25r modular surge arrester - 1 pole - 350V - with remote transfer

Extended Description for 15533 Schneider Electric

15533 Schneider Electric - This Acti9 PRD1 25r product is a modular surge arrester protecting 1P electrical installations against direct lightning strikes.,The Imax maximum discharge current is 40kA .The In nominal discharge current is 25kA.,The Type 1 surge arrester is recommended for electrical installations in the service sector and industrial buildings protected by a lightning conductor.,It also provides type 2 protection and protect the electrical installation by finely clipping the lightning wave overvoltage.,The surge arresters with r indication have remote transfer of the information Cartridge to be replaced.,The Uc maximum continuous operating voltage in common mode (between phase and earth) is 350VAC.,The Up Voltage protection level in common mode (between phase and earth) is 1.5kV.,The Ue rated operational voltage is 230VAC +/- 10%.,The product colour is anthracite grey (RAL7016).The dimensions are (W) 36mm x (H) 90mm x (D) 71mm. The weight is 334g.,The degree of protection is IP20 and IP40 in modular enclosure.,The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 80°C.,This product is compliant with EN 61643-11 and IEC 61643-11 standards.

Free Delivery to UK Mainland on orders over £25

Main

product or component type Extension for impulse relay
Device short name ETL
Relay application Remote control
Poles description 2P
Pole contact composition 1 C/O + 1 NO
[In] rated current 16 A
Network type AC

Complementary

Network frequency 50/60 Hz
[Ue] rated operational voltage 250 V AC 50/60 Hz
Control type Toggle,Remote control
Control signal type Impulse
Switching frequency 5 switching operations/minute
Impulse duration 50 ms
Remote control type Illuminated push-button 3 mA
Local signalling ON/OFF indication
[Uc] control circuit voltage 24 V AC 50/60 Hz,12 V DC
Supply inrush power 19 VA
mounting mode Fixed, on right side of TL
mounting support 35 mm symmetrical DIN rail
9 mm pitches 2
Height 84 mm
Width 18 mm
Depth 60 mm
colour Grey
Electrical durability AC-21: 200000 cycles,AC-22: 100000 cycles
Connections - terminals Tunnel type terminals - <= 10 mm²
Auxiliary connection terminal Tunnel type terminalscontrol circuit in 0.5…6 mm²

Environment

Standards EN 669-1,EN 669-2-2
Product certifications IMQ,CEBEC,VDE,GOST,NF
Noise level 60 dB
Tropicalisation 2
Relative humidity 95 % at 55 °C
Ambient air temperature for operation -20…50 °C

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 7.5 cm
Package 1 Width 3 cm
Package 1 Length 8.5 cm
Package 1 Weight 0.125 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details