A9MEM1570

A9MEM1570 Schneider Electric - PowerTag - Radio frequency measurement sensor - Vigi DT40/iC60 - 3P+N 63A - am/av

A9MEM1570 Schneider Electric - In radio-frequency communication, this sensor for Vigi iDT40/iC60 3P+N collects energy data and reports diagnostics and alarms on the states of the disj. PowerTag Energy is mounted upstream/downstream of the circuit breaker in the electrical panel.,It is specially designed for energy management, load monitoring and power availability applications.,The PowerTag Energy energy sensor is an all-in-one product without accessories.,Clamped onto the circuit breaker, this PowerTag sensor takes up little space in the electrical panel. without the need to add additional DIN rail. The Panel Server is the data concentrator equipment that retrieves data wirelessly.,It sends a voltage loss alarm and the current value per phase before being powered off.,The performance of this product meets the most international standards and demanding approvals: IEC 61557-12, IEC 61010-1, IEC 61010-2-030, IEC 61326-1, ETSI, EN 300 328, ETSI EN 301 487-1.,This product is Green Premium certified , the eco-label promising sustainable and environmentally friendly performance. It is also EU ROHS compliant.,This energy sensor is one of the smallest in the world that does not require cabling to the data hub. It is possible to install several dozen PowerTag sensors attached to the same data hub.,The saturation current is 130A and the first starting current is 40mA.,The nominal voltages Un are 230V AC Phase-Neutral +/- 20% or Phase-Phase 400V AC +/- 20%.,The maximum consumption is less than or equal to 2VA.,The degree of protection is IP20 and IK05.,The operating temperature is between -25 °C and + 60 °C. The storage temperature is between 40°C and +85°C.,The operating temperature is between -25°C and +60°C. The storage temperature is between 40°C and +85°C.,PowerTag Energy 63A complies with IEC 61557-12.