This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

A9MEM2135

A9MEM2135 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for A9MEM2135 Schneider Electric

A9MEM2135 Schneider Electric - modular single phase power meter iEM2135 - 230V - 63A with comm M-Bus - MID

Extended Description for A9MEM2135 Schneider Electric

A9MEM2135 Schneider Electric - The Acti9 iEM2100 series energy meters offer is a single-phase DIN rail-mounted energy meters fitted for basic metering.,This product family can be used to monitor power consumption for each sector, unit or workshop and manage electrical installation for building management.,It feature a 8-character LCD display and red LED indicator to display measured electrical parameters.,Providing Class 1 active energy accuracy per IEC 62053-21 standard, the meter will measure Active Energy.,Suitable for a 230VAC network, with a supply voltage range of 184 to 276 VAC at 50Hz or 60Hz.,Direct connect current measurement up to 63A with 32 samples per cycle only in a Single Phase and Neutral configuration.,Communication is assured by 1 pulse output.,Product dimensions are as follows: width 36 mm, depth 60 mm, height 81 mm and product weight 135 g.,Compatible with power management software to take advantage of the IoT digital power installation.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£184.03 Exc. VAT
£220.84 Inc. VAT

Main

Range Acti9
family Acti9 iEM2100
Device short name iEM2135
product or component type Energy meter

Complementary

Poles description 1P + N
Type of measurement Active and reactive energy,Active and reactive power,Current,Voltage,Power factor,Frequency
Metering type Active, reactive, apparent energy (signed, four quadrant)
device application Sub billing,Partial meter,Multi-tariff
Accuracy class Class 1 active energy conforming to IEC 62053-21,Class B active energy conforming to EN 50470-3,Class 2 reactive energy conforming to IEC 62053-23
Input type Direct input
Maximum current [Imax] 63 A
[Ib] basic current 5 A
Rated current 63 A
Rated voltage 230 V +/- 20 %
Network frequency 50 Hz,60 Hz
Frequency measurement range 45…65 Hz
Technology type Electronic
Display type LCD display
Sampling rate 32 samples/cycle
Measurement current 0.25…63 A
Display digits 8
Maximum value measured 999999.99 kWh
Tariff counter Tariff (2)
Communication port protocol M-bus at 300, 600, 1200, 2400, 4800 and 9600 bauds - 2 wires, insulation 3750 V
Communication port support Screw terminals: M-Bus
Local signalling Red LED: accuracy checking 1...1000 p/kWh
Digital inputs 1 digital
Supply voltage 96...276 V AC 50 Hz
Maximum power consumption in VA 3 VA at 240 V AC
Maximum power consumption in W 1 W
[Uimp] rated impulse withstand voltage 6 kV 1.2/50 µs
mounting mode Clip-on
mounting support DIN rail
Connections - terminals Power circuit: tunnel type terminals (bottom) 1 1.65…33 mm² cable(s) solid,Power circuit: tunnel type terminals (bottom) 1 1.65…33 mm² cable(s) stranded with cable end,Communication: screw clamp terminals (top) 1 1…4 mm² cable(s) solid,Communication: screw clamp terminals (top) 1 1…2.5 mm² cable(s) stranded with cable end
Tightening torque Power circuit: 2 N.m PZ2 screwdriver ,Communication: 0.5 N.m3.5 mm
Wire stripping length Power circuit: 17 mm,Communication: 7 mm
Standards IEC 62053-23,IEC 62052-31,IEC 62052-11,IEC 62053-21
Product certifications MID conforming to EN 50470-1,MID conforming to EN 50470-3,CE

Environment

IP degree of protection IP40 front panel: conforming to IEC 60529,IP20 casing:
Overvoltage category III
Pollution degree 2
Flame retardance V0 conforming to UL 94
Ambient air temperature for operation -25…55 °C
Ambient air temperature for storage -25…70 °C
Operating altitude < 2000 m
Relative humidity 0…95 % at 55 °C
colour White
9 mm pitches 4
Width 36 mm
Height 90 mm
Depth 70 mm
net weight 0.175 kg

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 5.2 cm
Package 1 Width 8.0 cm
Package 1 Length 9.8 cm
Package 1 Weight 219.0 g
Unit Type of Package 2 S02
Number of Units in Package 2 29
Package 2 Height 15 cm
Package 2 Width 30 cm
Package 2 Length 40 cm
Package 2 Weight 6.806 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

CAD

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details