This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

A9MEM2435

A9MEM2435 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for A9MEM2435 Schneider Electric

A9MEM2435 Schneider Electric - modular single phase power meter iEM2435 - 230V - 100A with communication M-Bus

Extended Description for A9MEM2435 Schneider Electric

A9MEM2435 Schneider Electric - The Acti9 iEM2400 series energy meters offer is a single-phase DIN rail-mounted energy meters fitted for basic metering.,This product family can be used to monitor power consumption for each sector, unit or workshop and manage electrical installation for building management.,It feature a 7-characters/digits display and red LED indicator to display measured electrical parameters.,Providing Class 1 active energy accuracy per IEC 62053-21 standard, the meter will measure Active and Reactive Power, Active and Reactive Energy, Voltage and Current.,Suitable for a 230VAC network, with a supply voltage range of 96 to 276 VAC at 50Hz or 60Hz.,Direct connect current measurement up to 100A with 32 samples per cycle only in a Single Phase and Neutral configuration.,Communication protocol is M-Bus with 2-wire terminal support, no additional communication ports.,You will have the possibility to switch between 2 tariffs via the communication bus.,Product dimensions are as follows: width 35.8 mm, depth 63 mm, height 96.71 mm and product weight 220 g.,This version is compliant with the standard EN 50470-3 class B, Measuring Instruments Directive (MID).,Compatible with power management software to take advantage of the IoT digital power installation.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£105.67 Exc. VAT
£126.80 Inc. VAT

Main

Range Acti9
family Acti9 iEM2000
Device short name iEM2435
product or component type Energy meter

Complementary

Poles description 1P + N
Type of measurement Active and reactive energy,Active and reactive power,Apparent power,Power factor,Current,Voltage,Frequency
Metering type Active and reactive energy
device application Sub billing,Multi-tariff
Accuracy class Class 1 active energy conforming to IEC 62053-21,Class 2 reactive energy conforming to IEC 62053-23,Class B active energy conforming to EN 50470-3
Input type Direct input
Rated current 100 A
Rated voltage 230 V - 15...10 %
Network frequency 50 Hz,60 Hz
Technology type Electronic
Display type LCD display
Sampling rate 32 samples/cycle
Measurement current 5…100 A
Display digits 7
Maximum value measured 99999.99 kWh,999999.9 kWh
Tariff counter Tariff (2)
Communication port protocol M-bus at 300, 600, 1200, 2400, 4800 and 9600 bauds - 2 wires, insulation 3750 V
Communication port support Screw terminals: M-Bus
Local signalling Red LED: metering and activity 0.01, 0.1, 1, 10, 100, 1000, 2000 or 10000 p/kWh
Digital inputs 0
Output voltage 5...27 V DC@100 mA
Impulse duration 5...32 ms
Supply voltage 195...253 V AC 50 Hz
Maximum power consumption in VA 1 VA at 240 V AC
mounting mode Clip-on
mounting support DIN rail
Connections - terminals Power circuit: screw clamp terminals (bottom) 1 2.5…35 mm² cable(s) ,Communication: screw clamp terminals (top) 1 2.5 mm² cable(s)
Standards IEC 62052-11,IEC 62053-21,IEC 61010-1
Product certifications MID conforming to EN 50470-1,MID conforming to EN 50470-3,CE

Environment

IP degree of protection IP51 front panel: conforming to IEC 60529,IP20 casing:
Pollution degree 2
Ambient air temperature for operation -25…55 °C
Ambient air temperature for storage -30…70 °C
Operating altitude < 2000 m
Relative humidity 0…95 %
colour White
9 mm pitches 4
Width 35.8 mm
Height 96.7 mm
Depth 63 mm

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 6.600 cm
Package 1 Width 4.000 cm
Package 1 Length 10.000 cm
Package 1 Weight 184.000 g
Unit Type of Package 2 BB1
Number of Units in Package 2 5
Package 2 Height 7.700 cm
Package 2 Width 11.000 cm
Package 2 Length 22.000 cm
Package 2 Weight 972.000 g
Unit Type of Package 3 S03
Number of Units in Package 3 30
Package 3 Height 30.000 cm
Package 3 Width 30.000 cm
Package 3 Length 40.000 cm
Package 3 Weight 6.800 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details