This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

A9N26907

A9N26907 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for A9N26907 Schneider Electric

A9N26907 Schneider Electric - Auxiliary contact, Acti9 A9N, SD, 1 C/O, 100mA to 6A, 24-415 VAC, 24-130 VDC, bottom connection

Extended Description for A9N26907 Schneider Electric

A9N26907 Schneider Electric - This Acti9 electrical auxiliary is a modular fault contact used as remote indication of tripping upon a fault of the associated device.,In AC network, the In rated current is 6A at 24VAC to 240VAC and 3A at 415VAC with operating frequency of 50Hz to 60Hz.,In DC network, the In rated current is 6A at 24VDC, 2A at 48VDC, 1.5A at 60VDC and 1A at 130VDC.,It has 1 position switch with contacts type 1 C/O.,It is intended for new or renovated installation in small commercial and buildings.,This fault contact is compatible with Acti9 ranges such as C120, C60H-DC, SW60-DC, C60PV-DC, and xC60.,The SD is either used for device short name or compatibility code. The mechanical indicator is provided within the product for local signalling.,It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable with a cable cross section of 0.5mm² to 2.5mm².,It has a screw clamp terminal connection at bottom. The connection allows flexible copper cables (2 cables) with a cable cross section of 1.5mm².,It has a screw clamp terminal connection at bottom. The connection allows flexible with ferrule copper cables (2 cables) with a cable cross section of 1.5mm².,The Ui rated insulation voltage is up to 500V. It has a Uimp rated impulse withstand voltage of 4kV.,It can be mounted on DIN rail for modular installation. The width in 9mm pitches is 1.,The dimensions are (W) 9mm x (H) 85.3mm x (D) 68mm. The product colour is white. The product weight is 30g.,The pollution degree is 3. The level of tropicalisation is treatment 2.,The wire stripping length is 9mm. The tightening torque of connection is 1N.m (bottom) for PZ1 screwdriver type.,The IP degree of protection is IP20.,The operating temperature is from -25°C to +70°C. The storage temperature is from -40°C to +85°C.,This product complies with EN/IEC 60947-5-1 and GB/T 14048.5 standards.,It has EAC and CCC quality labels and certified with CE and UKCA certifications.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£13.09 Exc. VAT
£15.71 Inc. VAT

Main

range of product Acti9
product or component type Fault contact
Device short name SD
Signal contacts composition 1 C/O
[In] rated current 0.1…6 A at 24...250 V, AC 50/60 Hz, 0.1…6 A at 24...240 V, AC 50/60 Hz, 0.1…3 A at 415 V, AC 50/60 Hz, 0.1…6 A at 24 V, DC, 0.1…2 A at 48 V, DC, 0.1…1.5 A at 60 V, DC, 0.1…1 A at 130 V, DC
9 mm pitches 1
Standards EN/IEC 60947-5-1,GB/T 14048.5
Product certifications CE,UKCA
Quality labels EAC,CCC

Complementary

[Ui] rated insulation voltage 500 V
[Uimp] rated impulse withstand voltage 4 kV
Local signalling Mechanical indicator
mounting mode Clip-on
Mounting location Left side of circuit-breaker
mounting support DIN rail
Comb busbar and distribution block compatibility Top: YES
Height 85.3 mm
Width 9 mm
Depth 68 mm
net weight 30 g
Colour White
Connections - terminals Screw clamp terminal (bottom) 1 cable(s) 0.5…2.5 mm² - rigid,Screw clamp terminal (bottom) 2 cable(s) 1.5 mm² - flexible,Screw clamp terminal (bottom) 2 cable(s) 1.5 mm² - flexible with ferrule
Wire stripping length 9 mm
Tightening torque 1 N.m bottom

Environment

IP degree of protection IP20
Pollution degree 3
Tropicalisation 2
Ambient air temperature for operation -25…70 °C
Ambient air temperature for storage -40…85 °C

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 7.7 cm
Package 1 Width 1.8 cm
Package 1 Length 9.4 cm
Package 1 Weight 46 g
Unit Type of Package 2 BB1
Number of Units in Package 2 12
Package 2 Height 8.4 cm
Package 2 Width 10 cm
Package 2 Length 23.5 cm
Package 2 Weight 636 g
Unit Type of Package 3 S03
Number of Units in Package 3 108
Package 3 Height 30 cm
Package 3 Width 30 cm
Package 3 Length 40 cm
Package 3 Weight 6.165 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Brochure

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details