This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ABE7E16SPN22

ABE7E16SPN22 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ABE7E16SPN22 Schneider Electric

ABE7E16SPN22 Schneider Electric - connection sub-base ABE7 - for Twido extension - 16 outputs - fuses

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£212.44 Exc. VAT
£254.93 Inc. VAT

Main

range of product Modicon ABE7
product or component type Passive discrete I/O sub-base
[Us] rated supply voltage 24 V DC for controller side,24 V DC for sensor/controller side
Number of channels 16
Number of terminal per channel 2
Connections - terminals Screw type terminals, 1 x 0.09...1 x 1.5 mm² (AWG 28...AWG 16) flexible with cable end,Screw type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 12) solid,Screw type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 14) flexible without cable end,Screw type terminals, 2 x 0.09...2 x 0.75 mm² (AWG 28...AWG 20) flexible with cable end,Screw type terminals, 2 x 0.2...2 x 2.5 mm² (AWG 28...AWG 16) solid
Connector destination Twido programmable controller

Complementary

Supply voltage limits 19…30 V DC (controller side) conforming to IEC 61131-2,20.4…28.8 V DC (sensor/controller side) conforming to IEC 61131-2
Discrete output number 16
Discrete output logic Source
Discrete output voltage 24 V
Discrete output voltage type DC
Product compatibility TWDDDO32TK,TWDDDO16TK
Status LED 1 LED for power ON,1 LED per channel for channel status
Polarity distribution 1 common/16 channels for output
Short-circuit protection 2 A internal fuse, 5 x 20 mm, fast blow (controller side),0.125 A fuse per channel, 5 x 20 mm, fast blow (output circuit)
Connector type HE-10
Pin number 20 pins
Fixing mode By clips, mounting on 35 mm symmetrical DIN rail conforming to IEC 60715,By screws
Maximum supply current 2 A
Current per channel 0.0032 A
Switched current 100 mA for output circuit
Maximum current per output common 1.6 A
Voltage drop on power supply fuse 0.3 V
[Ui] rated insulation voltage 2000 V terminals/mounting rails
Overvoltage category II conforming to IEC 60664-1
Tightening torque 0.6 N.m with flat Ø 3.5 mm screwdriver
net weight 0.45 kg

Environment

Product certifications UL,CSA
IP degree of protection IP2X conforming to IEC 60529
Resistance to incandescent wire 750 °C conforming to IEC 60695-2-11
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance 2 gn (f= 10…150 Hz) conforming to IEC 60068-2-6
Resistance to electrostatic discharge 4 kV (contact) level 3 conforming to IEC 61000-4-2,8 kV (air) level 3 conforming to IEC 61000-4-2
Resistance to radiated fields 10 V/m (80000000…2000000000 Hz) conforming to IEC 61000-4-3 level 3
Resistance to fast transients 2 kV level 3 conforming to IEC 61000-4-4
Ambient air temperature for operation -5…60 °C conforming to IEC 61131-2
Ambient air temperature for storage -40…80 °C conforming to IEC 61131-2
Pollution degree 2 conforming to IEC 60664-1

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8 cm
Package 1 Width 9 cm
Package 1 Length 14 cm
Package 1 Weight 455 g
Unit Type of Package 2 S03
Number of Units in Package 2 12
Package 2 Height 30 cm
Package 2 Width 30 cm
Package 2 Length 40 cm
Package 2 Weight 5.967 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible