This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ABE7H12S21

ABE7H12S21 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ABE7H12S21 Schneider Electric

ABE7H12S21 Schneider Electric - passive connection sub-base ABE7 - 12 inputs or outputs - Led - isolator

Free Delivery to UK Mainland on orders over £25

Main

range of product Modicon ABE7
product or component type Passive discrete I/O sub-base
Sub-base type I/O sub-base
[Us] rated supply voltage 19...30 V conforming to IEC 61131-2
Number of channels 12
Number of terminal per channel 2
Connections - terminals Screw type terminals, 1 x 0.09...1 x 1.5 mm² (AWG 28...AWG 16) flexible with cable end,Screw type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 12) solid,Screw type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 14) flexible without cable end,Screw type terminals, 2 x 0.09...2 x 0.75 mm² (AWG 28...AWG 20) flexible with cable end,Screw type terminals, 2 x 0.2...2 x 2.5 mm² (AWG 24...AWG 14) solid
Channel additional information 1 switch disconnector per channel

Complementary

supply voltage type DC
Number of horizontal rows 2
Status LED 1 LED per channel (green) channel status,1 LED (green) power ON
Polarity distribution 0 V or 24 V
Short-circuit protection 6.3 A internal fuse, 5 x 20 mm, fast blow (PLC end)
Connector type HE-10
Pin number 20 pins
Fixing mode By clips (35 mm symmetrical DIN rail),By screws (solid plate with fixing kit)
Maximum supply current 6.1 A
Current per channel 0.5 A
Maximum current per output common 6.1 A
Voltage drop on power supply fuse 0.2 V
[Ui] rated insulation voltage 2000 V
Installation category II conforming to IEC 60664-1
Tightening torque 0.6 N.m with flat Ø 3.5 mm screwdriver
Width 125 mm
net weight 0.375 kg

Environment

Product certifications UL,DNV,CSA,GL
IP degree of protection IP2X conforming to IEC 60529
Resistance to incandescent wire 750 °C conforming to IEC 60695-2-11
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance 2 gn (f= 10…150 Hz) conforming to IEC 60068-2-6
Resistance to electrostatic discharge 4 kV (contact) level 3 conforming to IEC 61000-4-2,8 kV (air) level 3 conforming to IEC 61000-4-2
Resistance to radiated fields 10 V/m (26000000…1000000000 Hz) conforming to IEC 61000-4-3 level 3
Resistance to fast transients 2 kV level 3 conforming to IEC 61000-4-4
Ambient air temperature for operation -5…60 °C conforming to IEC 61131-2
Ambient air temperature for storage -40…80 °C conforming to IEC 61131-2
Pollution degree 2 conforming to IEC 60664-1

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details