This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ABE7S16S1B2E

ABE7S16S1B2E Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ABE7S16S1B2E Schneider Electric

ABE7S16S1B2E Schneider Electric - sub-base - soldered solid state output relay ABE7 - 16 outputs - 0.5 A

Free Delivery to UK Mainland on orders over £25

Main

range of product Modicon ABE7
product or component type Solid state output relay sub-base
[Us] rated supply voltage 24 V DC for PLC end,24 V DC for preactuator end
Number of channels 16
Connections - terminals Spring terminal, 1 x 0.09...1 x 1.5 mm² (AWG 28...AWG 16) flexible with cable end,Spring terminal, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 12) solid,Spring terminal, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 14) flexible without cable end

Complementary

Terminal block type Removable
Supply voltage limits 19…30 V DC (PLC end) conforming to IEC 61131-2,30 V DC (preactuator end) conforming to IEC 61131-2
Isolation PLC/operative part No
Protection type Internal fuse 2 A 5 x 20 mm fast blow PLC end,Adjustable by external fuse 5 x 20 mm fast blow preactuator end
Fixing mode By clips (35 mm symmetrical DIN rail),By screws (solid plate with fixing kit)
Width 125 mm
Current state 0 guaranteed 0.4 mA (PLC end)
Voltage state 0 guaranteed 3.4 V for PLC end
Current state 1 guaranteed 3.1 mA (PLC end)
Voltage state 1 guaranteed 16.9 V for PLC end
Maximum current per output common 9 A
Current per channel 0.5 A for preactuator end
Minimum switching current 1 mA
Drop-out voltage 0.3 V (preactuator end)
Maximum switching current 700 mA DC-12,700 mA DC-13
Maximum tungsten load <10 W DC-6
Maximum residual current 0.5 mA preactuator end
Fault type Short-circuit,Overload
Fault indication Without
Switchable inductive energy L/R <= 400(U.I) ms
Maximum circuit breaker threshold 0.75 A
Response time <= 0.1 ms from state 1 to 0,<= 0.2 ms from state 0 to 1
Switching frequency < 0.6/LI² Hz
Installation category II conforming to IEC 60664-1
Tightening torque 0.6 N.m with flat Ø 3.5 mm screwdriver
net weight 0.4 kg

Environment

IP degree of protection IP2X conforming to IEC 60529
Resistance to incandescent wire 750 °C, extinction time <30 s conforming to IEC 60695-2-11
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance 2 gn (f= 10…150 Hz) conforming to IEC 60068-2-6
Resistance to electrostatic discharge 4 kV (contact) level 3 conforming to IEC 61000-4-2,8 kV (air) level 3 conforming to IEC 61000-4-2
Resistance to radiated fields 10 V/m (26000000…1000000000 Hz) conforming to IEC 61000-4-3 level 3
Resistance to fast transients 2 kV level 3 conforming to IEC 61000-4-4
Ambient air temperature for operation -5…60 °C conforming to IEC 61131-2
Ambient air temperature for storage -40…80 °C conforming to IEC 61131-2
Pollution degree 2 conforming to IEC 60664-1

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details