This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

AK5JB146

AK5JB146 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for AK5JB146 Schneider Electric

AK5JB146 Schneider Electric - BUS BAR TRI N 160ALG664MM

Extended Description for AK5JB146 Schneider Electric

AK5JB146 Schneider Electric - Busbars can be screw-mounted onto any type of support. If the busbar is to be used with component mounting plates with a tap-off, it is essential that the bus bar is mounted on the AM1DL201 DIN mounting rail. This 4 conducor bus bar system has 30 tap offs at 18 mm intervals. The busbar system is 26.3 inches (668 mm) long. Bus bar system is rated 160 A at 600 VAC. The bus bar system is 26.30 inches long, 3.19 inches wide and 3.23 inches deep. Each wieghs 0.41 oz. The busbar system is UL Listed, CSA certified and meet IEC requirements.

Free Delivery to UK Mainland on orders over £25

Manufacturer New

4 available
1 - 2 w.days
£148.14 Exc. VAT
£177.77 Inc. VAT

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£77.28 Exc. VAT
£92.74 Inc. VAT

Main

Range Linergy
Product name HK
product or component type Busbar
device application Distribution
Tap-offs (18 mm) 30
Bar length 668 mm
Enclosure/cubicle width 800 mm
Network type AC
[Ie] rated operational current 160 A at 35 °C
[Ue] rated operational voltage 400 V (off-load plugging-in and unplugging, with supply switched on) conforming to IEC 60439-1,480 V (off-load plugging-in and unplugging, with supply switched on) conforming to CSA,480 V (off-load plugging-in and unplugging, with supply switched on) conforming to UL,600 V (plugging-in and unplugging, with supply switched off) conforming to CSA,600 V (plugging-in and unplugging, with supply switched off) conforming to UL,690 V (plugging-in and unplugging, with supply switched off) conforming to IEC 60439-1
Number of conductors 4

Complementary

Bar width 45 mm
Width 81 mm
Depth 82 mm
Network frequency 50/60 Hz
[Ui] rated insulation voltage 600 V conforming to CSA,600 V conforming to UL,690 V conforming to IEC 60439-1
Peak current 25 kA
I²t on activation 10000000 A².s
Protection type AM fuses In = 160 A, Isc = 100 kA, Ie = 160 A,GF fuses In = 160 A, Isc = 100 kA, Ie = 160 A,NS160H circuit breaker In = 160 A, Isc = 36 kA, Ie = 160 A,NS160H circuit breaker In = 160 A, Isc = 70 kA, Ie = 160 A
Connections - terminals Connector 2.5…70 mm² flexible with cable end,Connector 2.5…70 mm² rigid
Tightening torque 10 N.m
Mounting position Vertical mounting using side stop AK5BT01 on mounting plates AK5PA,Horizontal mounting
Flame retardance V0 conforming to UL 94
net weight 1.3 kg

Environment

Standards IEC 60439
Product certifications LROS (Lloyds register of shipping),DNV,UL,CSA
IP degree of protection IPxx B conforming to IEC 60529
Fire resistance 850 °C conforming to IEC 60695

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 10.800 cm
Package 1 Width 11.000 cm
Package 1 Length 74.000 cm
Package 1 Weight 1.610 kg
Unit Type of Package 2 P06
Number of Units in Package 2 20
Package 2 Height 75.000 cm
Package 2 Width 60.000 cm
Package 2 Length 80.000 cm
Package 2 Weight 46.240 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

CAD

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details