This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

AP8659EU3

AP8659EU3 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for AP8659EU3 Schneider Electric

AP8659EU3 Schneider Electric - Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 16A, 230V, (21) C13 & (3) C19

Extended Description for AP8659EU3 Schneider Electric

AP8659EU3 Schneider Electric - APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering,Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets,Power sequencing delays allow users to define the order in which to power up or down attached equipment,Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding,Current metering provides real-time remote monitoring of connected loads,Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles,User-defined alarms warn of potential circuit overloads before critical IT failures occur,Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£2,767.80 Exc. VAT
£3,321.36 Inc. VAT

Overview

Presentation APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Lead time Usually in Stock

Main

colour Black
product or component type PDU
PDU type Switched metered outlet
Cord length 3.00 m
Provided equipment CAN port terminator,Installation guide,Locking input power cord,Rack mounting brackets,Safety guide,Serial configuration cable

Complementary

Input Voltage 200 V,208 V,230 V
Height 182.9 cm
Width 5.6 cm
Output Voltage 230 V
Depth 5.1 cm
net weight 6.77 kg
Mounting location Side
Mounting preference No preference
Input Plug Type IEC 60309 16 A 2P + E
mounting mode Not rack-mountable
Rack units 0U
Mounting position Vertical
Permissible voltage 100…240 V
Input current limits 16 A
Load capacity 3700 VA
Network frequency 50/60 Hz
Outlet type and quantity 21 IEC 60320 C13 ,3 IEC 60320 C19

Environment

Product certifications PSE,UL listed,VCCI class A,VDE
Standards EN 55022 class A,EN 55024,EN 61000-3-2,EN 61000-3-3,FCC part 15 class A,ICES-003
Ambient air temperature for operation -5…60 °C
Relative humidity 5…95 %
Operating altitude 0...10000 ft
Ambient air temperature for storage -25…65 °C
Storage Relative Humidity 5…95 %
Storage altitude 0.0000000000…15240.0000000000 m

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 203.8 cm
Package 1 Width 16.2 cm
Package 1 Length 11.7 cm
Package 1 Weight 9.031 kg

Contractual warranty

Warranty 2 years repair or replace

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details