This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ASIABLD3004

ASIABLD3004 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ASIABLD3004 Schneider Electric

ASIABLD3004 Schneider Electric - Power supply, Phaseo AS Interface, 144W, regulated switch mode, integrated fuse protection

Free Delivery to UK Mainland on orders over £25

Main

range of product Phaseo AS-Interface
product or component type Power supply
power supply type Regulated switch mode
Output voltage 30 V DC for AS-Interface line
Rated power in W 144 W
Input voltage 100...240 V AC phase to phase, terminal(s): L1-L2,100...240 V AC single phase, terminal(s): N-L1
Power supply output current 4.8 A
Detection type Earth fault
Operating position Vertical

Complementary

input voltage limits 85...264 V
Network frequency limits 47…63 Hz
Input voltage tolerance - 15...10 %
Inrush current 30 A
Cos phi 0.65
Efficiency 83 % at 30 V
Power dissipation in W 29.5 W at 30 V
current consumption 1 A
Input protection type Integrated fuse (not interchangeable)
Line and load regulation 3 %
Residual ripple 300 mV
Holding time >= 10 ms
Output protection type Against overload, protection technology: 1.1 x In,Against overvoltage, protection technology: tripping if U > 1.2 x Un,Against short-circuits, protection technology: automatic reset,Against undervoltage, protection technology: tripping if U < 0.95 x Un
Connections - terminals AS-Interface line: screw type terminals 4 x 2.5 mm², 4, cable cross section: 2.5 mm² (AWG 14),Input connection: screw type terminals 2 x 2.5 mm², 2, cable cross section: 2.5 mm² (AWG 14),Input ground connection: screw type terminals 1 x 2.5 mm², 1, cable cross section: 2.5 mm² (AWG 14),Output ground connection: screw type terminals 2 x 2.5 mm², 2, cable cross section: 2.5 mm² (AWG 14)
mounting support 75 mm symmetrical DIN rail,35 mm symmetrical DIN rail
Operating altitude 2000 m
Name of test Rapid transient conforming to IEC 61000-4-4 level 3,Conducted/radiated emissions conforming to EN 55022 class B,Electrostatic discharges conforming to EN/IEC 61000-4-2,Emission conforming to EN 61000-6-3,Induced electromagnetic field conforming to EN/IEC 61000-4-6,Primary outage conforming to IEC 61000-4-11,Vibration conforming to EN/IEC 61131-2,Radiated electromagnetic field conforming to EN/IEC 61000-4-3
Meantime between failure [MTBF] 100000 h at 40 °C
Status LED 1 LED (green) output voltage,1 LED (orange) input voltage
net weight 1.3 kg

Environment

Product certifications UL 508,TUV 60950-1,CSA 22-2 No 950
Environmental characteristic EMC conforming to EN 50081-1,EMC conforming to EN 55022 class B,EMC conforming to EN/IEC 61000-6-2,Safety conforming to EN 60950-1
IP degree of protection IP20 conforming to EN/IEC 60529
Ambient air temperature for operation 0…50 °C (without derating),50…60 °C (with derating factor)
Ambient air temperature for storage -25…70 °C
Relative humidity 0…95 % without condensation or dripping water
Dielectric strength 3000 V between input and ground,3000 V between input and output,500 V between output and ground,500 V between outputs

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 9.5 cm
Package 1 Width 13.4 cm
Package 1 Length 14.5 cm
Package 1 Weight 1.411 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

CAD

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details