This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ATV312HU11M3

ATV312HU11M3 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ATV312HU11M3 Schneider Electric

ATV312HU11M3 Schneider Electric - variable speed drive ATV312 - 1.1kW - 3kVA - 71 W - 200..240 V - 3-phase supply

Extended Description for ATV312HU11M3 Schneider Electric

ATV312HU11M3 Schneider Electric - This Altivar 312 3-phase variable speed drive has a rated power of 1.1kW, 3kVA, and a 200V to 240V AC rated output voltage.,It is suitable for industrial machines such as materials handling and packaging, packing, textile machines, special machines, pumps and fans.,It has a compact form-factor with 105mm width, allowing for a flexible and easy installation on a mounting plate.,It also offers a snap-lock seal, status and faults display and a jog dial navigation button.,It offers high readability of key parameters thanks to a bright LED 4-digit display.,SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime.

Free Delivery to UK Mainland on orders over £25

Main

range of product Altivar 312
product or component type Variable speed drive
Product destination Asynchronous motors
Product specific application Simple machine
Assembly style With heat sink
Component name ATV312
Motor power kW 1.1 kW
Motor power hp 1.5 hp
[Us] rated supply voltage 200...240 V - 15...10 %
Supply frequency 50...60 Hz - 5...5 %
Network number of phases 3 phases
Line current 8.5 A at 200 V, Isc = 5 kA,7.4 A at 240 V
EMC filter Without EMC filter
Apparent power 3 kVA
Maximum transient current 10.4 A for 60 s
Power dissipation in W 71 W at nominal load
Speed range 1…50
Asynchronous motor control profile Sensorless flux vector control with PWM type motor control signal,Factory set : constant torque
Electrical connection Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14,L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 2.5 mm² AWG 14
Supply Internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection,Internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection
communication port protocol Modbus,CANopen
IP degree of protection IP20 on upper part without cover plate,IP21 on connection terminals,IP31 on upper part,IP41 on upper part
Option card Communication card for CANopen daisy chain,Communication card for DeviceNet,Communication card for Fipio,Communication card for Modbus TCP,Communication card for Profibus DP

Complementary

Supply voltage limits 170…264 V
Prospective line Isc 5 kA
Continuous output current 6.9 A at 4 kHz
Output frequency 0…500 Hz
Nominal switching frequency 4 kHz
Switching frequency 2...16 kHz adjustable
Transient overtorque 170…200 % of nominal motor torque
Braking torque 150 % during 60 s with braking resistor,100 % with braking resistor continuously,150 % without braking resistor
Regulation loop Frequency PI regulator
Motor slip compensation Suppressable,Adjustable,Automatic whatever the load
Output voltage <= power supply voltage
Tightening torque Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6 N.m,L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 0.8 N.m
Insulation Electrical between power and control
Analogue input number 3
Analogue input type AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm,AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm,AI3 configurable current 0...20 mA, impedance: 250 Ohm
Sampling duration AI1, AI2, AI3: 8 ms analog,LI1...LI6: 4 ms discrete
Response time AOV, AOC 8 ms for analog,R1A, R1B, R1C, R2A, R2B 8 ms for discrete
Linearity error +/- 0.2 % for output
Analogue output number 1
Analogue output type AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits,AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits
Discrete input logic Logic input not wired (LI1...LI4), < 13 V (state 1),Negative logic (source) (LI1...LI6), > 19 V (state 0),Positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1)
Discrete output number 2
Discrete output type Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles,Configurable relay logic: (R2A, R2B) NC - 100000 cycles
Minimum switching current R1-R2 10 mA at 5 V DC
Maximum switching current R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms,R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms,R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms,R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms
Discrete input number 6
Discrete input type (LI1...LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm
Acceleration and deceleration ramps Linear adjustable separately from 0.1 to 999.9 s,S, U or customized
Braking to standstill By DC injection
Protection type Input phase breaks: drive,Line supply overvoltage and undervoltage safety circuits: drive,Line supply phase loss safety function, for three phases supply: drive,Motor phase breaks: drive,Overcurrent between output phases and earth (on power up only): drive,Overheating protection: drive,Short-circuit between motor phases: drive,Thermal protection: motor
Insulation resistance >= 500 mOhm 500 V DC for 1 minute
Local signalling 1 LED (red) for drive voltage,Four 7-segment display units for CANopen bus status
Time constant 5 ms for reference change
Frequency resolution Analog input: 0.1...100 Hz,Display unit: 0.1 Hz
Connector type 1 RJ45 for Modbus/CANopen
Physical interface RS485 multidrop serial link
Transmission frame RTU
Transmission rate 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen,4800, 9600 or 19200 bps for Modbus
Number of addresses 1…127 for CANopen,1…247 for Modbus
Number of drive 127 for CANopen,31 for Modbus
marking CE
Operating position Vertical +/- 10 degree
Height 143 mm
Width 105 mm
Depth 132 mm
net weight 1.7 kg

Environment

Dielectric strength 2040 V DC between earth and power terminals,2880 V AC between control and power terminals
Electromagnetic compatibility 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5,Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4,Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2,Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Standards IEC 61800-5-1,IEC 61800-3
Product certifications GOST,CSA,C-Tick,NOM,UL,DNV
Pollution degree 2
Protective treatment TC
Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6,1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity 5…95 % without condensation conforming to IEC 60068-2-3,5…95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for storage -25…70 °C
Ambient air temperature for operation -10…50 °C without derating (with protective cover on top of the drive),-10…60 °C with derating factor (without protective cover on top of the drive)
Operating altitude <= 1000 m without derating,1000...3000 m with current derating 1 % per 100 m

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 19.0 cm
Package 1 Width 20.0 cm
Package 1 Length 20.0 cm
Package 1 Weight 1.73 kg
Unit Type of Package 2 P06
Number of Units in Package 2 27
Package 2 Height 80.0 cm
Package 2 Width 80.0 cm
Package 2 Length 60.0 cm
Package 2 Weight 59.71 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

CAD

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details