This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ATV31C055N4

ATV31C055N4 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ATV31C055N4 Schneider Electric

ATV31C055N4 Schneider Electric - enclosed variable speed drive ATV31 - 0.55kW - 500V - IP55

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£846.10 Exc. VAT
£1,015.32 Inc. VAT

Main

range of product Altivar 31
product or component type Variable speed drive
Product destination Asynchronous motors
Product specific application Simple machine
Assembly style Enclosed
Component name ATV31
EMC filter Integrated
power supply voltage 380...500 V - 15...10 %
power supply frequency 50...60 Hz - 5...5 %
Network number of phases 3 phases
Motor power kW 0.55 kW
Motor power hp 0.75 hp
Line current 2.2 A 500 V 1 kA,2.8 A 380 V 1 kA
Apparent power 1.8 kVA
maximum prospective line Isc 5 kA
Nominal output current 1.9 A 4 kHz
Maximum transient current 2.9 A for 60 s
Power dissipation in W 37 W at nominal load
Speed range 1…50
Transient overtorque 150…170 % of nominal motor torque
Asynchronous motor control profile Factory set : constant torque,Sensorless flux vector control with PWM type motor control signal
Analogue input number 3
IP degree of protection IP55

Complementary

power supply voltage limit 323…550 V
power supply frequency limits 47.5…63 Hz
Speed drive output frequency 0.5…500 Hz
Nominal switching frequency 4 kHz
Switching frequency 2...16 kHz adjustable
Braking torque <= 150 % during 60 s with braking resistor,100 % with braking resistor continuously,100 % without braking resistor
Regulation loop Frequency PI regulator
Motor slip compensation Automatic whatever the load,Adjustable,Suppressable
Output voltage <= power supply voltage
Electrical connection Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14,L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 2.5 mm² AWG 14
Tightening torque Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6 N.m,L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 0.8 N.m
Insulation Electrical between power and control
Supply Internal supply for logic inputs 19…30 V, <100 mA overload protection,Internal supply for logic inputs 19…30 V, <100 mA short-circuit protection,Internal supply for reference potentiometer 10…10.8 V, <10 mA overload protection,Internal supply for reference potentiometer 10…10.8 V, <10 mA short-circuit protection
Analogue input type AI3 configurable current 0...20 mA, impedance: 250 Ohm,AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm,AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm
input sampling time LI1...LI6: 4 ms discrete,AI1, AI2, AI3: 8 ms analog
output response time AOV, AOC 8 ms for analog,R1A, R1B, R1C, R2A, R2B 8 ms for discrete
Linearity error +/- 0.2 % for output
Analogue output number 2
Analogue output type AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits,AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits
Discrete input logic Positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1),Logic input not wired (LI1...LI4), < 13 V (state 1),Negative logic (source) (LI1...LI6), > 19 V (state 0)
Discrete output number 2
Discrete output type Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles,Configurable relay logic: (R2A, R2B) NC - 100000 cycles
Minimum switching current 10 mA 5 V DC R1-R2
Maximum switching current 2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (R1-R2),2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (R1-R2),5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (R1-R2),5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (R1-R2)
Discrete input number 6
Discrete input type (LI1...LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm
Acceleration and deceleration ramps S, U or customized,Linear adjustable separately from 0.1 to 999.9 s
Braking to standstill By DC injection
Protection type Input phase breaks: drive,Line supply overvoltage and undervoltage safety circuits: drive,Line supply phase loss safety function, for three phases supply: drive,Motor phase breaks: drive,Overcurrent between output phases and earth (on power up only): drive,Overheating protection: drive,Short-circuit between motor phases: drive,Thermal protection: motor
Insulation resistance >= 500 mOhm 500 V DC for 1 minute
Local signalling 1 LED (red) for drive voltage,Four 7-segment display units for CANopen bus status
Time constant 5 ms for reference change
Frequency resolution Display unit: 0.1 Hz,Analog input: 0.1...100 Hz
communication port protocol CANopen,Modbus
Connector type 1 RJ45 for CANopen via VW3 CANTAP2 adaptor,1 RJ45 for Modbus
Physical interface RS485 multidrop serial link for Modbus
Transmission frame RTU for Modbus
Transmission rate 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen via VW3 CANTAP2 adaptor,4800, 9600 or 19200 bps for Modbus
Number of addresses 1…127 for CANopen via VW3 CANTAP2 adaptor,1…247 for Modbus
Number of drive 127 for CANopen via VW3 CANTAP2 adaptor,31 for Modbus
marking CE
Operating position Vertical +/- 10 degree
net weight 8.8 kg

Environment

Dielectric strength 2410 V DC between earth and power terminals,3400 V AC between control and power terminals
Electromagnetic compatibility 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5,Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4,Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2,Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Standards EN 50178
Product certifications C-Tick,N998,UL,CSA
Pollution degree 2
Protective treatment TC
Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6,1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity 5…95 % without condensation conforming to IEC 60068-2-3,5…95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for storage -25…70 °C
Ambient air temperature for operation -10…50 °C without derating (with protective cover on top of the drive),-10…60 °C with derating factor (without protective cover on top of the drive)
Operating altitude >= 1000 m with current derating 1 % per 100 m

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 28.2 cm
Package 1 Width 25.5 cm
Package 1 Length 36.5 cm
Package 1 Weight 6.912 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

CAD

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details