This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ATV71LD66M3Z

ATV71LD66M3Z Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ATV71LD66M3Z Schneider Electric

ATV71LD66M3Z Schneider Electric - variable speed drive Altivar Lift, 15 kW 20 Hp, 200...240 V three-phase, with heat sink

Free Delivery to UK Mainland on orders over £25

Main

Device short name ATV71
Product destination Synchronous motors,Asynchronous motors
Network number of phases 3 phases
Supply voltage limits 170…264 V
Supply frequency 50...60 Hz - 5...5 %
Motor power kW 15 kW, 3 phases at 200...240 V
Motor power hp 20 hp, 3 phases at 200...240 V
Line current 71.7 A for 200 V 3 phases 15 kW / 20 hp,61.6 A for 240 V 3 phases 15 kW / 20 hp
range of product Altivar Lift
product or component type Variable speed drive
Product specific application Lift
Variant With integrated 7-segment display terminal
communication port protocol CANopen,Modbus
[Us] rated supply voltage 200...240 V - 15...10 %

Complementary

Apparent power 25.6 kVA at 240 V 3 phases 15 kW / 20 hp
Prospective line Isc 22 kA for 3 phases
Nominal output current 66 A at 4 kHz 230 V 3 phases 15 kW / 20 hp
Maximum transient current 89.8 A for 2 s 3 phases / 15 kW / 20 hp
Speed drive output frequency 0…599 Hz
Speed range 1…100 for asynchronous motor in open-loop mode, without speed feedback,1…50 for synchronous motor in open-loop mode, without speed feedback,1…1000 for asynchronous motor in closed-loop mode with encoder feedback
Torque accuracy +/- 5 % in closed-loop mode with encoder feedback,+/- 15 % in open-loop mode, without speed feedback
Transient overtorque 170 %, +/- 10 % for 60 s,220 %, +/- 10 % for 2 s
Braking torque 30 % without braking resistor,<= 150 % with braking or hoist resistor
Local signalling 1 LED (red) for drive voltage
Output voltage <= power supply voltage
Insulation Electrical between power and control
type of cable for external connection Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR,Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC,With an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC,With a NEMA Type1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
Electrical connection Terminal, clamping capacity: 2.5 mm², AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR),Terminal, clamping capacity: 35 mm², AWG 2 (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
Tightening torque 5.4 N.m, 47.7 lb.in (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB),0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
Supply Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 A, protection type: overload and short-circuit protection,Internal supply: 24 V DC (21…27 V), <200 A, protection type: overload and short-circuit protection
Sampling duration 2 ms +/- 0.5 ms (LI6)if configured as logic input - discrete input(s),2 ms +/- 0.5 ms (LI1...LI5) - discrete input(s),2 ms +/- 0.5 ms (AI1-/Al1+) - analog input(s),2 ms +/- 0.5 ms (Al2) - analog input(s)
Response time R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s),R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s),AO1 2 ms, tolerance +/- 0.5 ms for analog output(s), <= 100 ms in STO (Safe Torque Off)
Accuracy +/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C,+/- 0.6 % (AI2) for a temperature variation 60 °C,+/- 1 % (AO1) for a temperature variation 60 °C
Linearity error +/- 0.15 % of maximum value (AI1-/Al1+, AI2),+/- 0.2 % (AO1)
Analogue output type AO1 software-configurable voltage: 0...10 V DC, impedance: 470 Ohm, resolution 10 bits,AO1 software-configurable current: 0...20 mA, impedance: 500 Ohm, resolution 10 bits,AO1 software-configurable logic output 10 V 20 A
Discrete output type Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles,Configurable relay logic: (R2A, R2B) NO - 100000 cycles
Minimum switching current 3 mA at 24 V DC for configurable relay logic
Maximum switching current 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (R1, R2),5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (R1, R2),2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (R1, R2),2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (R1, R2)
Discrete input type Programmable (LI1...LI5)24 V DC, with level 1 PLC - 3500 Ohm,Switch-configurable (LI6)24 V DC, with level 1 PLC - 3500 Ohm,Switch-configurable PTC probe (LI6) - 0…6 probes - 1500 Ohm,Safety input (PWR)24 V DC - 1500 Ohm
Discrete input logic Positive logic (LI6)if configured as logic input, < 5 V (state 0), > 11 V (state 1),Negative logic (LI6)if configured as logic input, > 16 V (state 0), < 10 V (state 1),Positive logic (LI1...LI5), < 5 V (state 0), > 11 V (state 1),Negative logic (LI1...LI5), > 16 V (state 0), < 10 V (state 1),Positive logic (PWR), < 2 V (state 0), > 17 V (state 1)
Dielectric strength 2830 V DC between earth and power terminals,4230 V DC between control and power terminals
Insulation resistance > 1 mOhm 500 V DC for 1 minute to earth
Frequency resolution Display unit: 0.1 Hz,Analog input: 0.024/50 Hz
Connector type 1 RJ45 (on front face) for Modbus,1 RJ45 (on terminal) for Modbus,Male SUB-D 9 on RJ45 for CANopen
Physical interface 2-wire RS 485 for Modbus
Transmission frame RTU for Modbus
Transmission rate 9600 bps, 19200 bps for Modbus on front face,4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal,20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
Data format 8 bits, 1 stop, even parity for Modbus on front face,8 bits, odd even or no configurable parity for Modbus on terminal
Type of polarization No impedance for Modbus
Number of addresses 1…247 for Modbus,1…127 for CANopen
control options Communication card for Modbus TCP,Communication card for Fipio,Communication card for Modbus/Uni-Telway,Communication card for Modbus Plus,Communication card for EtherNet/IP,Communication card for DeviceNet,Communication card for Profibus DP,Communication card for Profibus DP V1,Communication card for Interbus-S,Communication card for CC-Link,Interface card for encoder,I/O extension card,Controller inside programmable card,Overhead crane card
Discrete input number 7
Discrete output number 2
Analogue input number 2
Analogue input type AI2 software-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits,AI1-/Al1+ bipolar differential voltage: +/- 10 V DC 24 V max, resolution 11 bits + sign,AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits
Analogue output number 1
Method of access Slave CANopen
Asynchronous motor control profile Flux vector control without sensor, standard,Flux vector control without sensor, 2 points,Voltage/frequency ratio, 2 points,Flux vector control without sensor, ENA (energy Adaptation) system,Voltage/frequency ratio - Energy Saving, quadratic U/f,Voltage/frequency ratio, 5 points,Flux vector control with sensor, standard
Synchronous motor control profile Vector control with sensor, standard,Vector control without sensor, standard
Acceleration and deceleration ramps Linear adjustable separately from 0.01 to 9000 s,S, U or customized,Automatic adaptation of ramp if braking capacity exceeded, by using resistor
Motor slip compensation Not available in voltage/frequency ratio (2 or 5 points),Automatic whatever the load,Suppressable,Adjustable
Switching frequency 1...16 kHz adjustable
Nominal switching frequency 8 kHz
Network frequency 47.5...63 Hz
Protection type Overheating protection: drive,Thermal protection: drive,Short-circuit between motor phases: drive,Input phase breaks: drive,Overcurrent between output phases and earth: drive,Overvoltages on the DC bus: drive,Break on the control circuit: drive,Against exceeding limit speed: drive,Line supply undervoltage: drive,Line supply overvoltage: drive,Against input phase loss: drive,Thermal protection: motor,Motor phase break: motor,Power removal: motor

Environment

Pollution degree 2 conforming to EN/IEC 61800-5-1
IP degree of protection IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1,IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529,IP21 conforming to EN/IEC 61800-5-1,IP21 conforming to EN/IEC 60529,IP41 on upper part conforming to EN/IEC 61800-5-1,IP41 on upper part conforming to EN/IEC 60529,IP54 on lower part conforming to EN/IEC 61800-5-1,IP54 on lower part conforming to EN/IEC 60529
Vibration resistance 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6,1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
Noise level 60.2 dB conforming to 86/188/EEC
Relative humidity 5…95 % without condensation conforming to IEC 60068-2-3,5…95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for operation -10…50 °C (without derating)
Operating altitude <= 1000 m without derating,1000...3000 m with current derating 1 % per 100 m
Operating position Vertical +/- 10 degree
Product certifications C-Tick,CSA,UL,NOM 117,GOST
marking CE
Standards IEC 60721-3-3 class 3S2,IEC 60721-3-3 class 3C1,UL Type 1
Assembly style With heat sink
Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2,Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3,Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4,1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5,Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6,Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Regulation loop Adjustable PI regulator
Speed accuracy +/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn,+/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
Ambient air temperature for storage -25…70 °C

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 38 cm
Package 1 Width 40 cm
Package 1 Length 60 cm
Package 1 Weight 22 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details