This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

BMH0702T02F1A

BMH0702T02F1A Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for BMH0702T02F1A Schneider Electric

BMH0702T02F1A Schneider Electric - servo motor BMH - 2.5 Nm - 8000 rpm - untapped shaft - with brake - IP54

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£1,181.50 Exc. VAT
£1,417.80 Inc. VAT

Main

Device short name BMH
product or component type Servo motor
Maximum mechanical speed 8000 rpm
Continuous stall torque 2.5 N.m for LXM32.D30M2 at 10 A, 115 V, single phase,2.5 N.m for LXM32.D18M2 at 6 A, 230 V, single phase
Peak stall torque 6.4 N.m for LXM32.D30M2 at 10 A, 115 V, single phase,7.4 N.m for LXM32.D18M2 at 6 A, 230 V, single phase
Nominal output power 600 W for LXM32.D30M2 at 10 A, 115 V, single phase,900 W for LXM32.D18M2 at 6 A, 230 V, single phase
Nominal torque 2.3 N.m for LXM32.D30M2 at 10 A, 115 V, single phase,2.1 N.m for LXM32.D18M2 at 6 A, 230 V, single phase
Nominal speed 2500 rpm for LXM32.D30M2 at 10 A, 115 V, single phase,4000 rpm for LXM32.D18M2 at 6 A, 230 V, single phase
Product compatibility LXM32.D30M2 at 115 V single phase,LXM32.D18M2 at 230 V single phase
Shaft end Smooth shaft
IP degree of protection IP54 standard
Speed feedback resolution 131072 points/turn x 4096 turns
Holding brake With
mounting support International standard flange
Electrical connection Straight connectors

Complementary

Range compatibility Lexium 32
[Us] rated supply voltage 240 V
Network number of phases Three phase
Continuous stall current 5.38 A
Continuous power 1.51 W
Maximum current Irms 15 A for LXM32.D30M2,17.5 A for LXM32.D18M2
Maximum permanent current 17.71 A
Second shaft Without second shaft end
Shaft diameter 11 mm
Shaft length 23 mm
Feedback type Multiturn SinCos Hiperface
Holding torque 3 N.m holding brake
Motor flange size 70 mm
Number of motor stacks 2
Torque constant 0.46 N.m/A at 120 °C
Back emf constant 29.6 V/krpm at 120 °C
Number of motor poles 10
Rotor inertia 1.24 kg.cm²
Stator resistance 1.15 Ohm at 20 °C
Stator inductance 3.6 mH at 20 °C
Stator electrical time constant 3.1 ms at 20 °C
Maximum radial force Fr 710 N at 1000 rpm,560 N at 2000 rpm,490 N at 3000 rpm,450 N at 4000 rpm,410 N at 5000 rpm,390 N at 6000 rpm
Maximum axial force Fa 0.2 x Fr
Brake pull-in power 7 W
Type of cooling Natural convection
Length 193 mm
Centring collar diameter 60 mm
Centring collar depth 2.5 mm
Number of mounting holes 4
Mounting holes diameter 5.5 mm
Circle diameter of the mounting holes 82 mm
net weight 3.3 kg

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 11 cm
Package 1 Width 20 cm
Package 1 Length 40 cm
Package 1 Weight 2.8 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details