This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ILE1B661PB1A3

ILE1B661PB1A3 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ILE1B661PB1A3 Schneider Electric

ILE1B661PB1A3 Schneider Electric - brushless dc motor 24..36 V - Profibus DP interface - L = 174 mm - 54:1

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£1,881.32 Exc. VAT
£2,257.58 Inc. VAT

Main

range of product Lexium integrated drive
product or component type Motion integrated drive
Device short name ILE
Motor type Brushless DC motor
Number of motor poles 6
Network number of phases Single phase
[Us] rated supply voltage 24 V,36 V
Network type DC
Communication interface Profibus DP, integrated
Length 174 mm
Winding type Medium speed of rotation and medium torque
Electrical connection Printed circuit board connector
Holding brake Without
Gear box type Straight teeth gear, 4 stages
Reduction ratio 54:1 (490:9)
Nominal speed 73 rpm at 24 V,88 rpm at 36 V
Nominal torque 10 N.m at 36 V,9.5 N.m at 24 V

Complementary

Transmission rate 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000 and 12000 kbauds
mounting support Flange
Motor flange size 66 mm
Number of motor stacks 1
Centring collar diameter 16 mm
Centring collar depth 4 mm
Number of mounting holes 4
Mounting holes diameter 4.4 mm
Circle diameter of the mounting holes 73.54 mm
Feedback type BLDC encoder
Shaft end Keyed
Second shaft Without second shaft end
Shaft diameter 10 mm
Shaft length 25 mm
Key width 16 mm
Supply voltage limits 18…40 V
Current consumption 7000 mA peak,5500 mA maximum continuous
Associated fuse rating 10 A
Input/output type 4 signals (each be used as input or output)
Voltage state 0 guaranteed -3...4.5 V
Voltage state 1 guaranteed 15...30 V
Discrete input current 10 mA at 24 V on/STO_A for safety input,3 mA at 24 V on/STO_B for safety input,2 mA at 24 V for 24 V signal interface
Discrete output voltage 23...25 V
Maximum switching current 100 mA per output,200 mA total
Protection type Overload of output voltage,Short circuit of the output voltage,Safe torque off
Maximum supply current 0.06 A at 36 V (power stage disabled),0.1 A at 24 V (power stage disabled),3.5 A at 36 V,4.3 A at 24 V
Nominal output power 73 W at 24 V,88 W at 36 V
Peak stall torque 12.64 N.m at 24 V,17.5 N.m at 36 V
Continuous stall torque 11.5 N.m
Detent torque 3.3 N.m
Speed feedback resolution 12 points/turn motor,0.55° gearbox output
Accuracy error +/- 1 point
Maximum torsional backlash 1 °
Rotor inertia 441 kg.cm²
Maximum mechanical speed 92 rpm
Maximum radial force Fr 200 N (long-term operation),200 N (short-term operation)
Maximum axial force Fa 10 N (long-term operation),80 N (short-term operation)
Service life in hours 2500 h bearing short-term operation,15000 h bearing long-term operation
marking CE
Type of cooling Natural convection
net weight 1.85 kg

Environment

Standards EN/IEC 50178,EN 61800-3 : 2001-02,EN/IEC 61800-3,EN 61800-3:2001, second environment,IEC 60072-1,EN 50347,IEC 61800-3, Ed 2
Product certifications TÜV,cUL,UL
Ambient air temperature for operation 50…65 °C (with power derating of 2 % per °C),0…50 °C (without derating)
Permissible ambient air temperature around the device 105 °C power amplifier,110 °C motor
Ambient air temperature for storage -25…70 °C
Operating altitude <= 1000 m without derating
Relative humidity 15…85 % without condensation
Vibration resistance 20 m/s² (f= 10…500 Hz) 10 cycles conforming to EN/IEC 60068-2-6
Shock resistance 150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29
IP degree of protection IP41 shaft bushing: conforming to EN/IEC 60034-5,IP54 total except shaft bushing: conforming to EN/IEC 60034-5

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 11 cm
Package 1 Width 19 cm
Package 1 Length 39.5 cm
Package 1 Weight 2.281 kg
Unit Type of Package 2 S04
Number of Units in Package 2 5
Package 2 Height 30 cm
Package 2 Width 40 cm
Package 2 Length 60 cm
Package 2 Weight 12.502 kg
Package 3 Height 30.0 cm

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details