This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ILE2K661PC1A0

ILE2K661PC1A0 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ILE2K661PC1A0 Schneider Electric

ILE2K661PC1A0 Schneider Electric - brushless dc motor 24..48V- EtherNet/IP interface - L = 122 mm- w/o gearbox

Extended Description for ILE2K661PC1A0 Schneider Electric

ILE2K661PC1A0 Schneider Electric - This product is part of the Lexium ILA, ILE, ILS range, an offer of Integrated drives for motion control.,This is a brushless DC motor without gearbox, without holding brake. The feedback is made with a BLDC encoder.,Its nominal speed is 4800rpm at 24VDC, 6000rpm at 36VDC. Its nominal torque is 0.26Nm at 24VDC and 0.26Nm at 36VDC.,Integrated motor reduces the amount of space required for a machine by consolidating components and eliminating the need for enclosures.,Its transmission rates are 125, 250, and 500kbauds.,Its reduction ratio is 1 per 1. The electrical connection is made on an industrial connector.,Its motor flange size is 66mm. It installs with 4x 4.4mm mounting holes. The circle diameter of the mounting holes is 73.54mm. It weighs 1.4kg.,It integrates an Ethernet/IP interface.,This product is certified by CUL, TÃV and UL.,It is compatible with ILE integrated drives.,Those mounting positions are allowed per IEC 60034-7 as IM B5 shaft horizontal, IM V1 shaft vertical, shaft end down, IM V3 shaft vertical, shaft end up.,Lexium-integrated drives are used to create decentralized motion control solutions in very compact units.,Integrated Drives for motion control with stepper, servo or brushless DC motor.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£908.35 Exc. VAT
£1,090.02 Inc. VAT

Main

range of product Lexium integrated drive
product or component type Motion integrated drive
Device short name ILE
Motor type Brushless DC motor
Number of motor poles 6
Network number of phases Single phase
[Us] rated supply voltage 24 V,48 V
Network type DC
Communication interface Ethernet/IP, integrated
Length 122 mm
Winding type Medium speed of rotation and medium torque
Electrical connection Industrial connector
Holding brake Without
Gear box type Without
Reduction ratio 1:1
Nominal speed 4800 rpm at 24 V,6000 rpm at 48 V
Nominal torque 0.26 N.m at 24 V,0.26 N.m at 48 V

Complementary

Transmission rate 125, 250, 500 kbauds
mounting support Flange
Motor flange size 66 mm
Number of motor stacks 1
Centring collar diameter 40 mm
Centring collar depth 2 mm
Number of mounting holes 4
Mounting holes diameter 4.4 mm
Circle diameter of the mounting holes 73.54 mm
Feedback type BLDC encoder
Shaft end Untapped
Second shaft Without second shaft end
Shaft diameter 8 mm
Shaft length 25 mm
Supply voltage limits 18…55.2 V
Current consumption 7000 mA peak,5500 mA maximum continuous
Associated fuse rating 16 A
Commissioning interface RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
Input/output type 4 signals (each be used as input or output)
Voltage state 0 guaranteed -3...4.5 V
Voltage state 1 guaranteed 15...30 V
Discrete input current 10 mA at 24 V on/STO_A for safety input,3 mA at 24 V on/STO_B for safety input,2 mA at 24 V for 24 V signal interface
Discrete output voltage 23...25 V
Maximum switching current 100 mA per output,200 mA total
Protection type Safe torque off,Overload of output voltage,Short circuit of the output voltage
Maximum supply current 0.1 A (power stage disabled),6.8 A at 24 V,3.8 A at 48 V
Nominal output power 131 W at 24 V,163 W at 48 V
Peak stall torque 0.43 N.m at 24 V,0.43 N.m at 48 V
Continuous stall torque 0.28 N.m
Detent torque 0.08 N.m
Speed feedback resolution 12 points/turn
Accuracy error +/- 0.5 °
Rotor inertia 0.17 kg.cm²
Maximum mechanical speed 7000 rpm,6500 rpm
Maximum radial force Fr 80 N
Maximum axial force Fa 30 N (force pressure),30 N (tensile force)
Service life in hours 20000 h bearing
marking CE
Type of cooling Natural convection
net weight 1.4 kg

Environment

Standards EN 61800-3 : 2001-02,IEC 50178,EN 61800-3:2001, second environment,IEC 60072-1,IEC 61800-3, Ed 2,IEC 61800-3,IEC 50347
Product certifications cUL,UL,TÜV
Ambient air temperature for operation 40…55 °C (with power derating of 2 % per °C),0…40 °C (without derating)
Permissible ambient air temperature around the device 105 °C power amplifier,110 °C motor
Ambient air temperature for storage -25…70 °C
Operating altitude <= 1000 m without derating
Relative humidity 15…85 % without condensation
Vibration resistance 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance 150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protection IP41 shaft bushing: conforming to IEC 60034-5,IP54 total except shaft bushing: conforming to IEC 60034-5

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8.0 cm
Package 1 Width 18.5 cm
Package 1 Length 36.5 cm
Package 1 Weight 1.7 kg

Logistical informations

Country of origin US

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details