This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ILE2T661PB1A1

ILE2T661PB1A1 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ILE2T661PB1A1 Schneider Electric

ILE2T661PB1A1 Schneider Electric - brushless dc motor 24..48 V - Modbus TCP interface - L = 174 mm - 18:1

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£1,404.40 Exc. VAT
£1,685.28 Inc. VAT

Main

range of product Lexium integrated drive
product or component type Motion integrated drive
Device short name ILE
Motor type Brushless DC motor
Number of motor poles 6
Network number of phases Single phase
[Us] rated supply voltage 24 V,48 V
Network type DC
Communication interface Modbus TCP, integrated
Length 174 mm
Winding type Medium speed of rotation and medium torque
Electrical connection Printed circuit board connector
Holding brake Without
Gear box type Straight teeth gear, 3 stages
Reduction ratio 18:1 (160:9)
Nominal speed 225 rpm at 24 V,281 rpm at 48 V
Nominal torque 3.5 N.m at 24 V,3.5 N.m at 48 V

Complementary

Transmission rate 10, 100 Mbits
mounting support Flange
Motor flange size 66 mm
Number of motor stacks 1
Centring collar diameter 16 mm
Centring collar depth 4 mm
Number of mounting holes 4
Mounting holes diameter 4.4 mm
Circle diameter of the mounting holes 73.54 mm
Feedback type BLDC encoder
Shaft end Keyed
Second shaft Without second shaft end
Shaft diameter 10 mm
Shaft length 25 mm
Key width 16 mm
Supply voltage limits 18…55.2 V
Current consumption 7000 mA peak,5500 mA maximum continuous
Associated fuse rating 16 A
Commissioning interface RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
Input/output type 4 signals (each be used as input or output)
Voltage state 0 guaranteed -3...4.5 V
Voltage state 1 guaranteed 15...30 V
Discrete input current 10 mA at 24 V on/STO_A for safety input,3 mA at 24 V on/STO_B for safety input,2 mA at 24 V for 24 V signal interface
Discrete output voltage 23...25 V
Maximum switching current 100 mA per output,200 mA total
Protection type Safe torque off,Short circuit of the output voltage,Overload of output voltage
Maximum supply current 0.1 A (power stage disabled),6.8 A at 24 V,3.8 A at 48 V
Nominal output power 119 W at 48 V,95 W at 24 V
Peak stall torque 6.19 N.m at 24 V,6.19 N.m at 48 V
Continuous stall torque 4.3 N.m
Detent torque 1.42 N.m
Speed feedback resolution 1.667° gearbox output,12 points/turn motor
Accuracy error +/- 0.5 point
Maximum torsional backlash 1 °
Rotor inertia 48 kg.cm²
Maximum mechanical speed 281 rpm
Maximum radial force Fr 200 N (long-term operation),200 N (short-term operation)
Maximum axial force Fa 10 N (long-term operation),80 N (short-term operation)
Service life in hours 2500 h bearing short-term operation,15000 h bearing long-term operation
marking CE
Type of cooling Natural convection
net weight 1.85 kg

Environment

Standards IEC 60072-1,IEC 50347,IEC 61800-3,IEC 50178,EN 61800-3 : 2001-02,EN 61800-3:2001, second environment,IEC 61800-3, Ed 2
Product certifications cUL,TÜV,UL
Ambient air temperature for operation 40…55 °C (with power derating of 2 % per °C),0…40 °C (without derating)
Permissible ambient air temperature around the device 105 °C power amplifier,110 °C motor
Ambient air temperature for storage -25…70 °C
Operating altitude <= 1000 m without derating
Relative humidity 15…85 % without condensation
Vibration resistance 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance 150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protection IP41 shaft bushing: conforming to IEC 60034-5,IP54 total except shaft bushing: conforming to IEC 60034-5

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8.0 cm
Package 1 Width 18.5 cm
Package 1 Length 35.5 cm
Package 1 Weight 2.8 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details