This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

ILS2T852PC1A0

ILS2T852PC1A0 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ILS2T852PC1A0 Schneider Electric

ILS2T852PC1A0 Schneider Electric - integrated drive ILS with stepper motor - 24..48 V - Modbus TCP - 5 A

Extended Description for ILS2T852PC1A0 Schneider Electric

ILS2T852PC1A0 Schneider Electric - This product is part of the Lexium ILA, ILE, ILS range, an offer of integrated drives for motion control.,This is an integrated drive with a stepper motor, without gearbox, without holding brake. The feedback is given by an index pulse.,Its nominal speed is 180rpm at 24VDC, 360rpm at 48VDC. Its nominal torque is 4.0Nm. It embeds 4 signals which can be used as input or output.,This integrated drive consists of control electronics with a communication interface for Modbus TCP bus, and a 3-phase stepper motor.,Its transmission rates are 10 and 100Mbits.,The electrical connection is made on an industrial connector.,Its motor flange size is 85mm. It installs with 4x 6.5mm mounting holes. The circle diameter of the mounting holes is 99mm. It weighs 3.6kg.,It integrates a modbus TCP interface.,This product is certified by cUL, TÃV and UL.,It is compatible with pre-assembled cables for Modbus interface and power supply.,Those mounting positions are allowed per IEC 60034-7 as IM B5 shaft horizontal, IM V1 shaft vertical, shaft end down, IM V3 shaft vertical, shaft end up.,Lexium-integrated drives are used to create decentralized motion control solutions in very compact units.,integrated Drives for motion control with stepper, servo or brushless DC motor.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£726.45 Exc. VAT
£871.74 Inc. VAT

Main

range of product Lexium integrated drive
product or component type Motion integrated drive
Device short name ILS
Motor type 3-phase stepper motor
Number of motor poles 6
Network number of phases Single phase
[Us] rated supply voltage 48 V,24 V
Network type DC
Communication interface Modbus TCP, integrated
Length 170.6 mm
Winding type Medium speed of rotation and medium torque
Electrical connection Industrial connector
Holding brake Without
Gear box type Without
Nominal speed 180 rpm at 24 V,360 rpm at 48 V
Nominal torque 4 N.m
Holding torque 4 N.m

Complementary

Transmission rate 10, 100 Mbits
mounting support Flange
Motor flange size 85 mm
Number of motor stacks 2
Centring collar diameter 60 mm
Centring collar depth 2 mm
Number of mounting holes 4
Mounting holes diameter 6.5 mm
Circle diameter of the mounting holes 99 mm
Feedback type Index pulse
Shaft end Untapped
Second shaft Without second shaft end
Shaft diameter 12 mm
Shaft length 30 mm
Supply voltage limits 18…55 V
Current consumption 5000 mA maximum continuous
Associated fuse rating 16 A
Commissioning interface RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
Input/output type 4 signals (each be used as input or output)
Voltage state 0 guaranteed -3...4.5 V
Voltage state 1 guaranteed 15...30 V
Discrete input current 10 mA at 24 V for safety input,2 mA at 24 V for 24 V signal interface
Discrete output voltage 23...25 V
Maximum switching current 100 mA per output,200 mA total
Protection type Overload of output voltage,Safe torque off,Short circuit of the output voltage
Peak stall torque 4 N.m
Continuous stall torque 4 N.m
Speed feedback resolution 20000 points/turn
Accuracy error +/- 6 arc min
Rotor inertia 2.2 kg.cm²
Maximum mechanical speed 3000 rpm
Maximum radial force Fr 100 N
Maximum axial force Fa 170 N (tensile force),30 N (force pressure)
Service life in hours 20000 h bearing
marking CE
Type of cooling Natural convection
net weight 3.6 kg

Environment

Standards IEC 61800-3,IEC 50347,IEC 50178,IEC 60072-1,EN 61800-3:2001, second environment,EN 61800-3 : 2001-02,IEC 61800-3, Ed 2
Product certifications TÜV,cUL,UL
Ambient air temperature for operation 40…55 °C (with power derating of 2 % per °C),0…40 °C (without derating)
Permissible ambient air temperature around the device 105 °C power amplifier,110 °C motor
Ambient air temperature for storage -25…70 °C
Operating altitude <= 1000 m without derating
Relative humidity 15…85 % without condensation
Vibration resistance 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance 150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protection IP41 shaft bushing: conforming to IEC 60034-5,IP54 total except shaft bushing: conforming to IEC 60034-5

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 10.4 cm
Package 1 Width 18.0 cm
Package 1 Length 36.5 cm
Package 1 Weight 4.1 kg

Logistical informations

Country of origin DE

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details