This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

IMD-IM9-OL

IMD-IM9-OL Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for IMD-IM9-OL Schneider Electric

IMD-IM9-OL Schneider Electric - VIGILOHM IM9 - OL 110-415 V CA

Extended Description for IMD-IM9-OL Schneider Electric

IMD-IM9-OL Schneider Electric - This device belongs to the Vigilohm range designed to monitor ungrounded/IT electrical networks, in accordance to installation and products standards.,According to standards, it is recommanded to equip your systems with Insulation Monitoring Devices (IMD).,This device is dedicated to monitoring off line loads.,It mesures the load insulation resistance by injecting a DC current between the network and ground.,Configuration will be set depending on the load. Settings are available on the front of the device.,Settings are alarm and pre-alarm thresholds, and setting to start to motor or not.,It is equipped with a manual auto-test.,In case the system insulation resistance drops below the set threshold, meaning a ground fault occurred, an alarm is triggered thru the IMD output relay.,Once no fault is monitored, the alarm is cleared, the alarm relay is back to normal.,This product can be installed on DIN rail.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£202.71 Exc. VAT
£243.25 Inc. VAT

Main

Range Vigilohm
Device short name IM9-OL
product or component type Insulation monitoring device
device application Off-line motor
Earthing system TT,TN-S,IT

Complementary

Network rated voltage 0…690 V - AC at 45...440 Hz (phase to phase) ,0…690 V - DC (between poles)
Type of measurement Stator insulation resistance
Threshold setting Pre-alarm: 0.5...10 MOhm,Motor no start: 0.25...2 MOhm
Response time <= 2 s
auxiliary supply voltage 110...415 V AC 45...440 Hz +/- 15 %,125...250 V DC +/- 15 %
internal impedance 500 kOhm - AC at 45...440 Hz,1 MOhm - DC
Test function Manual
output contact 1 C/O standard,1 C/O fail-safe
breaking capacity 250 V - AC at 6 A,12...24 V - DC at 6 A
communication port protocol -
mounting mode Clip-on,Flush-mounted
mounting support DIN rail,Panel
Mounting position Horizontal,Vertical
Connections - terminals Tunnel type terminals0.2…2.5 mm²
Material Thermoplastic
net weight 0.2 kg
Height 90 mm
Width 71 mm
Depth 67.5 mm

Environment

IP degree of protection Case: IP20,Front face: IP40
Environmental characteristic Exposure to damp heat not in service conforming to IEC 60068-2-30,Exposure to damp heat in service conforming to IEC 60068-2-56,Salt mist conforming to IEC 60068-2-52
Type of installation Indoor
Standards IEC 61557-8,IEC 60664-1
Product certifications EAC,DNV,CE
Ambient air temperature for operation -25…55 °C
Ambient air temperature for storage -40…70 °C

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8.000 cm
Package 1 Width 8.500 cm
Package 1 Length 9.500 cm
Package 1 Weight 222.000 g
Unit Type of Package 2 S03
Number of Units in Package 2 36
Package 2 Height 30.000 cm
Package 2 Width 30.000 cm
Package 2 Length 40.000 cm
Package 2 Weight 8.442 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details