This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

KNB16CM2

KNB16CM2 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for KNB16CM2 Schneider Electric

KNB16CM2 Schneider Electric - TAPOFF UNIT 16A LNPE

Extended Description for KNB16CM2 Schneider Electric

KNB16CM2 Schneider Electric - This is a single phase tap off unit for Canalis KN busbar trunking with plug-in outlets.,It is used for rapid connection of loads or secondary lines in compliance with installation standards IEC 60364 and regulations concerning TT, TNS and TNC earthing systems.,It is equipped with a phase selection system (L1, L2 or L3 + N + PE).,The rated operational current is 16A.,The rated operational voltage is from 230VAC to 500VAC 50/60Hz depending on protective device.,It is equipped with a single pole iC60 circuit breaker curve N.,The tap-off unit polarity is L+N+PE, disconnection by drawing out.,It is suitable for TT, TN-S and TN-C earthing system.,The colour is white RAL 9001.,Blanking plate and MCB circuit breaker are provided.,It provides IP41 protection degree conforming to EN/IEC 60529.,It provides IK08 mechanical impact degree conforming to EN/IEC 62262.,It is compliant with IEC 61439-1 and IEC 61439-6.,It is compliant with Schneider Green Premium ecolabel (RoHS, REACh, Product Environmental Profile, End of Life Instructions.).

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£61.14 Exc. VAT
£73.37 Inc. VAT

Main

range of product Canalis
Range compatibility Canalis KN busbar trunking
product or component type Tap-off unit
busbar trunking compatibility Canalis KN busbar trunkingplug-in
[Ie] rated operational current 16 A
Protection type Circuit breaker: iC60N
Mounting mode Plug-in with phase selection
tap-off unit polarity L+N+PE
Colour White (RAL 9001)

Complementary

device application Low power distribution
Provided equipment 1 circuit-breaker included, cable clamp
[Ue] rated operational voltage 230...500 V depending on protective device
[Uimp] rated impulse withstand voltage 4.6 kV
[Ui] rated insulation voltage 400 V depending on protective device,500 V depending on protective device
Network frequency 50/60 Hz
Electrical connection Cable clamp terminal 4 mm² flexible,Cable clamp terminal 6 mm² rigid
door/cover opening side Front
Tap-off unit disconnection mode By drawing out
Standards IEC 61439-6,IEC 61439-1
Width 79 mm
Depth 70 mm
Height 172 mm
net weight 0.34 kg

Environment

Earthing system TT,TN-S
IP degree of protection IP41 conforming to IEC 60529
IK degree of protection IK08 conforming to IEC 62262

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8.400 cm
Package 1 Width 7.400 cm
Package 1 Length 13.500 cm
Package 1 Weight 340.000 g
Unit Type of Package 2 BB1
Number of Units in Package 2 30
Package 2 Height 15.800 cm
Package 2 Width 28.500 cm
Package 2 Length 43.500 cm
Package 2 Weight 10.615 kg
Unit Type of Package 3 P06
Number of Units in Package 3 60
Package 3 Height 46.500 cm
Package 3 Width 80.000 cm
Package 3 Length 60.000 cm
Package 3 Weight 30.000 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details