This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

LC1F150G7

LC1F150G7 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for LC1F150G7 Schneider Electric

LC1F150G7 Schneider Electric - TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 150 A - coil 115 V AC

Extended Description for LC1F150G7 Schneider Electric

LC1F150G7 Schneider Electric - TeSys F contactors have been designed for motors in normal or severe service conditions.,They are commonly used in industry, infrastructure, building and renewable energy applications.,TeSys F contactors are available in 11 contactor ratings for inductive motor applications up to 800 full-load amps and resistive loads up to 2100 amps.,This 150A inductive 3 pole IEC contactor can be mounted directly to a panel.,Contactors have both Horsepower and Kw motor rating for international acceptance.,Contactor is rated for 40HP at 200 to 208VAC, 50HP at 240VAC, 100HP at 480VAC and 125HP at 600VAC three phase.,When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 65kA.,When used with 600VAC Class J or CC fuses up to 200A, this contactor can have a SCCR up to 100kA.,Contactor is supplied with a 120 VAC 50/60 Hz coil.,Contactor has one normally open auxiliary contact built-in as standard.,An extensive line of accessories makes it easy to meet the requirements of most applications.,The contactor is 6.69 inches tall, 6.44 inches wide and 6.73 inches deep. It weighs 7.56 lbs.,Contactor is certified to UL, IEC, CCC, ABS, DNV, CB, BV, RINA, RMRoS and Marine standards.,Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£588.59 Exc. VAT
£706.31 Inc. VAT

Main

Range TeSys
range of product TeSys F
product or component type Contactor
Device short name LC1F
Contactor application Motor control,Resistive load
Utilisation category AC-4,AC-3,AC-1
Poles description 3P
[Ue] rated operational voltage <= 690 V AC 50/60 Hz,<= 460 V DC
[Uc] control circuit voltage 120 V AC 40...400 Hz
[Ie] rated operational current 250 A (at <40 °C) at <= 440 V AC-1,150 A (at <55 °C) at <= 440 V AC-3

Complementary

[Uimp] rated impulse withstand voltage 8 kV
[Ith] conventional free air thermal current 250 A (at 40 °C)
Rated breaking capacity 1200 A conforming to IEC 60947-4-1
[Icw] rated short-time withstand current 1200 A 40 °C - 10 s,700 A 40 °C - 30 s,600 A 40 °C - 1 min,450 A 40 °C - 3 min,350 A 40 °C - 10 min
Associated fuse rating 160 A aM at <= 440 V,250 A gG at <= 440 V
Average impedance 0.35 mOhm - Ith 250 A 50 Hz
[Ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1,1500 V conforming to VDE 0110 group C
Power dissipation per pole 22 W AC-1,8 W AC-3
Overvoltage category III
power pole contact composition 3 NO
Motor power kW 75 kW at 380...400 V AC 50/60 Hz (AC-3),80 kW at 415 V AC 50/60 Hz (AC-3),80 kW at 440 V AC 50/60 Hz (AC-3),90 kW at 500 V AC 50/60 Hz (AC-3),100 kW at 660...690 V AC 50/60 Hz (AC-3),40 kW at 220...230 V AC 50/60 Hz (AC-3),22 kW at 400 V AC 50/60 Hz (AC-4)
Control circuit voltage limits Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C),Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)
Mechanical durability 10 Mcycles
Inrush power in VA 770 VA, 40...400 Hz cos phi 0.9 (at 20 °C)
Hold-in power consumption in VA 8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)
Maximum operating rate 2400 cyc/h 55 °C
Operating time 35 ms closing (at Uc) ,130 ms opening (at Uc)
Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end,Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end,Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end,Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end,Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end,Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end,Power circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mm,Power circuit: lugs-ring terminals 1 cable(s) 120 mm²,Power circuit: connector 1 cable(s) 120 mm²,Power circuit: bolted connection
Tightening torque Control circuit: 1.2 N.m,Power circuit: 18 N.m
mounting support Plate
Heat dissipation 5.9…7.2 W
Standards JIS C8201-4-1,IEC 60947-1,EN 60947-4-1,IEC 60947-4-1,EN 60947-1
Product certifications CB,UL,RMRoS,BV,RINA,LROS (Lloyds register of shipping),DNV,CCC,ABS,UKCA
compatibility code LC1F
Control circuit type AC at 40...400 Hz

Environment

IP degree of protection IP2X front face with shrouds conforming to IEC 60529,IP2X front face with shrouds conforming to VDE 0106
Protective treatment TH
Ambient air temperature for operation -40…60 °C
Ambient air temperature for storage -60…80 °C
Permissible ambient air temperature around the device 60…70 °C at Uc
Height 170 mm
Width 163.5 mm
Depth 171 mm
Operating altitude 3000 m without derating
net weight 3.43 kg

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 21.0 cm
Package 1 Width 20.0 cm
Package 1 Length 24.0 cm
Package 1 Weight 4.19 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details