This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

LC1F265P7

LC1F265P7 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for LC1F265P7 Schneider Electric

LC1F265P7 Schneider Electric - TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 265 A - coil 230 V AC

Extended Description for LC1F265P7 Schneider Electric

LC1F265P7 Schneider Electric - TeSys F contactor, 3 poles (3NO), 265A/1000V AC-3, for motor applications up to 132kW@400V.,It provides a low sealed consumption 230V 40-400Hz AC coil, bolt terminals for bars or cables with lugs.,For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability.,It makes installation and maintenance easy thanks to its drawer-mounted coil and a large choice of add-on blocks and accessories (to be ordered separately).,Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£773.01 Exc. VAT
£927.61 Inc. VAT

Main

Range TeSys
range of product TeSys F
product or component type Contactor
Device short name LC1F
Contactor application Resistive load,Motor control
Utilisation category AC-4,AC-3,AC-1
Poles description 3P
[Ue] rated operational voltage <= 1000 V AC-1,<= 690 V AC-3,<= 690 V AC-4,<= 460 V DC
[Uc] control circuit voltage 230 V AC 40...400 Hz
[Ie] rated operational current 350 A (at <40 °C) at <= 440 V AC AC-1,265 A (at <55 °C) at <= 440 V AC AC-3

Complementary

[Uimp] rated impulse withstand voltage 8 kV
[Ith] conventional free air thermal current 350 A (at 40 °C)
Rated breaking capacity 2120 A conforming to IEC 60947-4-1
[Icw] rated short-time withstand current 2200 A 40 °C - 10 s,1230 A 40 °C - 30 s,950 A 40 °C - 1 min,620 A 40 °C - 3 min,480 A 40 °C - 10 min
Associated fuse rating 315 A aM at <= 440 V,400 A gG at <= 440 V
Average impedance 0.3 mOhm - Ith 350 A 50 Hz
[Ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1,1500 V conforming to VDE 0110 group C
Power dissipation per pole 37 W AC-1,21 W AC-3
Overvoltage category III
power pole contact composition 3 NO
Motor power kW 132 kW at 380...400 V AC 50/60 Hz (AC-3),140 kW at 415 V AC 50/60 Hz (AC-3),140 kW at 440 V AC 50/60 Hz (AC-3),160 kW at 500 V AC 50/60 Hz (AC-3),160 kW at 660...690 V AC 50/60 Hz (AC-3),147 kW at 1000 V AC 50/60 Hz (AC-3),75 kW at 220...230 V AC 50/60 Hz (AC-3),51 kW at 400 V AC 50/60 Hz (AC-4)
Control circuit voltage limits Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C),Drop-out: 0.15...0.2 Uc 40...400 Hz (at 55 °C)
Mechanical durability 10 Mcycles
Inrush power in VA 650 VA, 40...400 Hz cos phi 0.9 (at 20 °C)
Hold-in power consumption in VA 10 VA, 40...400 Hz cos phi 0.9 (at 20 °C)
Maximum operating rate 2400 cyc/h 55 °C
Operating time 40...65 ms closing,100...170 ms opening
Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end,Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end,Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end,Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end,Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end,Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end,Power circuit: bar 2 cable(s) - busbar cross section: 32 x 4 mm,Power circuit: lugs-ring terminals 1 cable(s) 240 mm²,Power circuit: connector 1 cable(s) 240 mm²,Power circuit: bolted connection
Tightening torque Control circuit: 1.2 N.m,Power circuit: 35 N.m
mounting support Plate
Heat dissipation 8 W
motor power range 55…100 kW at 200…240 V 3 phases,110…220 kW at 480…500 V 3 phases,110…220 kW at 380…440 V 3 phases
Motor starter type Direct on-line contactor
Contactor coil voltage 230 V AC standard
Standards EN 60947-4-1,IEC 60947-1,IEC 60947-4-1,EN 60947-1,JIS C8201-4-1
Product certifications BV,CSA,LROS (Lloyds register of shipping),ABS,UL,CB,DNV,RMRoS,RINA,UKCA
compatibility code LC1F
Control circuit type AC at 40...400 Hz

Environment

IP degree of protection IP20 front face with shrouds conforming to IEC 60529,IP20 front face with shrouds conforming to VDE 0106
Protective treatment TH
Ambient air temperature for operation -5…55 °C
Ambient air temperature for storage -60…80 °C
Permissible ambient air temperature around the device -40…70 °C
Height 203 mm
Width 201.5 mm
Depth 213 mm
Operating altitude 3000 m without derating
net weight 7.44 kg

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 25.000 cm
Package 1 Width 25.000 cm
Package 1 Length 29.000 cm
Package 1 Weight 7.942 kg
Unit Type of Package 2 P06
Number of Units in Package 2 12
Package 2 Height 62.000 cm
Package 2 Width 60.000 cm
Package 2 Length 80.000 cm
Package 2 Weight 103.804 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details