This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

LXM05AD14N4

LXM05AD14N4 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for LXM05AD14N4 Schneider Electric

LXM05AD14N4 Schneider Electric - motion servo drive LXM05A - 1.4 kW - 380..480 V - 3-phase - with EMC filter

Free Delivery to UK Mainland on orders over £25

Main

range of product Lexium 05
product or component type Motion servo drive
Component name LXM05A
Network number of phases Three phase
power supply voltage 380...480 V - 15...10 %
Continuous output current 5 A at 8 kHz,6 A at 4 kHz
Nominal power 1.4 kW at 4 kHz
Discrete input number 2 safety discrete input(s),4 logic discrete input(s)
Analogue input number 2
Type of polarization Integrated and switchable impedances for CANopen,No polarization impedances for Modbus

Complementary

power supply voltage limits 323…528 V
Supply frequency 50/60 Hz - 5...5 %
power supply frequency limits 47.5…63 Hz
transient RMS output current 10 A at 4 kHz for 3 s,7.5 A at 8 kHz for 3 s
Line current 3.3 A at 480 V,4.2 A at 380 V
maximum prospective line Isc 5 kA
Switching frequency 8 kHz,4 kHz
Overvoltage category III
Inrush current 60 A
Maximum leakage current 30 mA
Output voltage <= power supply voltage
Insulation Electrical between power and control
recommended type of cable for mounting in an enclosure Single-strand IEC cable (temperature: 45 °C) copper 70 °C PVC,Single-strand IEC cable (temperature: 45 °C) copper 90 °C XLPE/EPR
Electrical connection Terminal, clamping capacity: 6 mm², AWG 10 (PA/+, PBI, PBe),Terminal, clamping capacity: 6 mm², AWG 10 (R/L1, S/L2, T/L3)
Tightening torque PA/+, PBI, PBe: 1.2 N.m,R/L1, S/L2, T/L3: 1.2 N.m
Discrete input type Logic (LI1, LI2, LI3, LI4 terminals),Safety (PWRR_A, PWRR_B terminals)
Sampling duration ANA1+/ANA1-, ANA2+/ANA2-: 0.25 ms analog,LI1, LI2, LI3, LI4: 0.25 ms discrete
Discrete input voltage 24 V DC for logic,24 V DC for safety
Discrete input logic Negative (LI1, LI2, LI3, LI4) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1,Positive logic (compliment of PWRR_A, compliment of PWRR_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1,Positive logic (LI1, LI2, LI3, LI4) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Response time <= 10 ms
Discrete output number 2
Discrete output type Logic output(s) (LO1, LO2)24 V DC
Discrete output voltage <= 30 V DC
Discrete output logic Negative (LO1, LO2) conforming to EN/IEC 61131-2,Positive (LO1, LO2) conforming to EN/IEC 61131-2
Contact bounce time 1 ms for LI1...LI4
Braking current 50 mA
Response time on output 1 ms (LO1, LO2) for discrete output(s)
Absolute accuracy error < +/- 1 % 25 °C,< +/- 2 % over operating temperature range
Linearity error < +/- 0.5 %
Analogue input type ANA1+/ANA1-, ANA2+/ANA2- analog input: differential +/- 10 V, impedance: >= 10000 Ohm, resolution: 14 bits
Protection type Inputs signal: against reverse polarity,Outputs signal: against short-circuits
Safety function PWR protection of the machine stop and/or prevent unintended operation of the servo motor conforming to IEC/EN 61800-5-2,PWR protection of the machine stop and/or prevent unintended operation of the servo motor conforming to ISO 13849-1 level d,PWR protection of the system process stop and/or prevent unintended operation of the servo motor conforming to EN/IEC 61508 level SIL2,PWR protection of the system process stop and/or prevent unintended operation of the servo motor conforming to IEC/EN 61800-5-2
communication port protocol Modbus,CANopen,CANopen Motionbus
Connector type RJ45 (labelled CN4) for CANopen, CANopen Motionbus,RJ45 (labelled CN4) for Modbus,Spring terminals (labelled CN1) for CANopen, CANopen Motionbus
Method of access Slave CANopen, CANopen Motionbus
Physical interface 2-wire RS485 multidrop Modbus,RS422 for 1 A/B input(s), <= 400 kHz,RS422 for 1 CW/CCW input(s), <= 400 kHz,RS422 for 1 ESIM output input(s), <= 400 kHz,RS422 for 1 P/D input(s), <= 400 kHz
Transmission rate 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen, CANopen Motionbus,9600, 19200, 38400 bps for Modbus
Data format 8 bits, no parity, 1 or 2 stop for Modbus,8 bits, odd or even parity, 1 stop for Modbus
Number of addresses 1…127 for CANopen, CANopen Motionbus,1…247 for Modbus
Communication service 1 receive SDO + 1 transmit SDO for CANopen Motionbus,2 PDO for CANopen Motionbus,2 receive SDO + 2 transmit SDO for CANopen,3 PDO + 1 configurable mapping PDO for CANopen,CiA DSP 402 profile for CANopen,CiA DSP 402 profile for CANopen Motionbus,Communication monitoring for Modbus,Diagnostics (08) for Modbus,Read device identification (43) for Modbus,Read holding registers (03) for Modbus,Read/write multiple registers (23) for Modbus,Write multiple registers (16) for Modbus,Write single register (06) for Modbus
diagnostics Drive voltage: 1 LED (red),Error: 1 LED (CANopen),RUN: 1 LED (CANopen)
Signalling function Display of faults integrated 7-segment display terminal
max nodes number 31 for Modbus
Input resistance 5 kOhm
marking CE
Type of cooling Fan
Operating position Vertical +/- 10 degree
net weight 1.4 kg

Environment

EMC filter Integrated
Electromagnetic compatibility 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5,Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4,Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2,Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Standards EN/IEC 61800-3,EN/IEC 61800-5-1,EN/IEC 50178
Product certifications cUL,UL
IP degree of protection IP20 on upper part with protective cover removed conforming to EN/IEC 60529,IP20 on upper part with protective cover removed conforming to EN/IEC 61800-5-1,IP41 on upper part with protective cover in place conforming to EN/IEC 60529,IP41 on upper part with protective cover in place conforming to EN/IEC 61800-5-1
Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6,1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to EN/IEC 60028-2-27
Pollution degree 2 conforming to EN/IEC 61800-5-1
Environmental characteristic Classes 3C1 conforming to IEC 60721-3-3
Relative humidity Class 3K3 (5 to 93 %) without condensation conforming to IEC 60721-3-3
Ambient air temperature for operation 0…50 °C
Ambient air temperature for storage -25…70 °C
Operating altitude <= 1000 m without derating,> 1000...2000 m with conditions

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 20.0 cm
Package 1 Width 21.0 cm
Package 1 Length 23.5 cm
Package 1 Weight 2.006 kg
Unit Type of Package 2 S06
Number of Units in Package 2 33
Package 2 Height 73.5 cm
Package 2 Width 60.0 cm
Package 2 Length 80.0 cm
Package 2 Weight 79.198 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details