This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

LXM23DU20M3X

LXM23DU20M3X Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for LXM23DU20M3X Schneider Electric

LXM23DU20M3X Schneider Electric - motion servo drive - Lexium 23 - three phase 170...255 V - 2 kW - I/O

Free Delivery to UK Mainland on orders over £25

Main

range of product Lexium 23 Plus
product or component type Motion servo drive
Device short name LXM23

Complementary

Format of the drive Book
Network number of phases 3 phases
[Us] rated supply voltage 220 V 3 phases (tolerance: - 20...15 %)
Supply voltage limits 170…255 V 3 phases
Supply frequency 50/60 Hz - 5...5 %
Network frequency limits 47.5…63 Hz
Continuous output current 13.4 A
Continuous power 2000 W at 220 V
Nominal power 2 kW at 220 V
Maximum leakage current 3.5 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Twisted shielded pairs cable (single or double) (temperature: 0…55 °C)
Electrical connection Terminal, clamping capacity: 1.3 mm², AWG 16 (L1-L2),Terminal, clamping capacity: 2.1 mm², AWG 14 (R, S, T),Terminal, clamping capacity: 2.1 mm², AWG 14 (PA/+, PBe),Terminal, clamping capacity: 2.1 mm²/3.3 mm², AWG 14...AWG 12 (U, V, W)
Tightening torque PE (ground): 1.4 N.m
Discrete input number 8 programmable discrete input(s)
Discrete input type Programmable (CN1 terminals)
Discrete input voltage 12...24 V DC for logic
Discrete input logic Positive or negative (CN1)
Discrete output number 5
Discrete output type Logic output(s) (CN1)12...24 V DC
Discrete output voltage 12...24 V DC
Discrete output logic Positive or negative (CN1)
Analogue input number 2
Absolute accuracy error 0.01 %
Analogue input type V_REF voltage analog input: - 10...10 V, impedance: 10 kOhm,T_REF voltage analog input: - 10...10 V, impedance: 10 kOhm
Control signal type Servo motor encoder feedback
Protection type Against reverse polarity: inputs signal,Against short-circuits: outputs signal,Overcurrent: motor,Overvoltage: motor,Undervoltage: motor,Overheating: motor,Overload: motor,Overspeed: motor,Abnormal pulse control command: drive
Communication interface Modbus, integrated
Connector type RJ45 (CN3) for Modbus
Method of access Slave
Physical interface 2-wire RS485 multidrop for Modbus
Transmission rate Configurable
Status LED 1 LED charge LED
Signalling function Servo status and fault codes five 7-segment display units
marking CE
Type of cooling Integrated fan
Operating position Vertical
Width 114 mm
Height 225 mm
Depth 195 mm
net weight 3.2 kg

Environment

EMC filter Without EMC filter
Electromagnetic compatibility EMC immunity level 3 conforming to EN/IEC 61000-4-2,EMC immunity level 3 conforming to EN/IEC 61000-4-3,EMC immunity level 3 conforming to EN/IEC 61000-4-5,EMC immunity level 4 conforming to EN/IEC 61000-4-4,EMC immunity with additional EMC filter conforming to EN/IEC 61800-3 environments 1 and 2,Conducted and radiated emissions with additional EMC filter conforming to EN/IEC 61800-3 environments 1 and 2 category C2, C3
Standards EN/IEC 61800-5-1
Product certifications C-Tick,cULus 508
IP degree of protection On upper part: IP20 (without protective cover),On upper part: IP41 (with protective cover)
Vibration resistance 0.075 mm peak to peak (f= 10…57 Hz) conforming to IEC 60068-2-6,1 gn (f= 57…150 Hz) conforming to IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity Class 3K3 (5 to 85 %) without condensation or dripping water conforming to IEC 60721-3-3
Ambient air temperature for operation 0…55 °C conforming to UL
Ambient air temperature for storage -20…65 °C
Operating altitude <= 1000 m without derating,> 1000...2000 m with continuous power derating of 1 % per 100 m

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 20.0 cm
Package 1 Width 27.6 cm
Package 1 Length 35.0 cm
Package 1 Weight 4.196 kg
Unit Type of Package 2 S06
Number of Units in Package 2 8
Package 2 Height 73.5 cm
Package 2 Width 60.0 cm
Package 2 Length 80.0 cm
Package 2 Weight 46.568 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details