This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

LXM28EU02M3X

LXM28EU02M3X Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for LXM28EU02M3X Schneider Electric

LXM28EU02M3X Schneider Electric - Lexium28 EtherCAT drive, 200W, 1/3~ 230V

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£659.97 Exc. VAT
£791.96 Inc. VAT

Main

range of product Lexium 28
Device short name LXM28E
product or component type Motion servo drive
Format of the drive Compact housing
Line current 2.4 A 226.8 % at 220 V, single phase,2.4 A 200.7 % at 220 V, three phase

Complementary

Network number of phases Single or three phases
[Us] rated supply voltage 200...240 V (- 10...15 %) for three phase,200...240 V (- 20...15 %) for single phase
Supply voltage limits 200…255 V three phase,170…255 V single phase
Supply frequency 50/60 Hz - 5...5 %
Network frequency 47.5...63 Hz
EMC filter Without EMC filter
Continuous output current 1.5 A at 16 kHz
Output current 3s peak 4.5 A at 220 V
Continuous power 200 W at 220 V
Nominal power 0.2 kW at 220 V 16 kHz
Switching frequency 16 kHz
Overvoltage category III
Maximum leakage current 1.3 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Shielded motor cable (temperature: 0…55 °C) copper
Electrical connection Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2),Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S, T),Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE),Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)
Discrete input number 8 programmable (CN1),2 fast capture (CN1),1 safety function STO (CN9)
Discrete input voltage 24 V DC for logic
Discrete input logic Positive or negative (CN1)
Discrete output number 5 logic output (CN1) at 12...24 V DC,1 pulse train output (PTO) (CN1)
Discrete output voltage 12...24 V DC
Discrete output logic Positive or negative (CN1)
Control signal type Servo motor encoder feedback CN2
Protection type Against reverse polarity: inputs signal,Against short-circuits: outputs signal,Overcurrent: motor,Overvoltage: motor,Undervoltage: motor,Overheating: motor,Overload: motor,Overspeed: motor
Safety function STO (safe torque off), integrated
Safety level SIL 2 conforming to IEC 61800-5-2: 2007,SIL 2 conforming to IEC 61508-1: 2010,PL d/category 3 conforming to ISO 13849-1: 2008,SIL 2 conforming to ISO 13849-1: 2009/AC,SIL 2 conforming to IEC 60204-1: 2006,SIL 2 conforming to IEC 60204-1: 2009/A1,SIL 2 conforming to IEC 60204-1: 2010/AC,SIL 2 conforming to IEC 62061: 2012
Communication interface EtherCAT, integrated
Connector type RJ45 (CN4) for EtherCAT
Method of access Slave
Transmission rate 100 Mbit/s for EtherCAT
Physical interface RS485 for Modbus Serial line slave
Status LED 1 LED (red) DC bus energized,1 LED (multi-colour) N.RUN,1 LED (multi-colour) N.ERR,2 LEDs (yellow) Link (Link Status),2 LEDs (yellow) activity
Signalling function Servo status and fault codes five 7-segment display units
marking CULus,CSA,CE
Type of cooling Natural convection
Operating position Vertical
Product compatibility Servo motor BCH2 (60 mm, 1 motor stacks) at 200 W
Width 55 mm
Height 150 mm
Depth 146 mm
net weight 1 kg
Output current 3s peak 2 4.5 A at 220 V
Output current 3s peak 3 4.5 A at 220 V

Environment

Electromagnetic compatibility Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Standards IEC 61800-5-1
Product certifications CE,cULus,CSA
IP degree of protection IP20
Vibration resistance 3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3
Shock resistance 10 gn, type I conforming to IEC 60721-3-3
Relative humidity 5…95 % without condensation
Ambient air temperature for operation 0…55 °C
Ambient air temperature for storage -25…65 °C
Operating altitude <= 1000 m without derating,> 1000...2000 m 1 % per 100 m

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8.38 cm
Package 1 Width 23.62 cm
Package 1 Length 24.38 cm
Package 1 Weight 1.29 kg
Unit Type of Package 2 S03
Number of Units in Package 2 5
Package 2 Height 30 cm
Package 2 Width 29.9 cm
Package 2 Length 39.8 cm
Package 2 Weight 6.9 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details