This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

LXM28EU20M3X

LXM28EU20M3X Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for LXM28EU20M3X Schneider Electric

LXM28EU20M3X Schneider Electric - Lexium28 EtherCAT drive, 2.0kW, 3~ 230V

Extended Description for LXM28EU20M3X Schneider Electric

LXM28EU20M3X Schneider Electric - This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW.,The motion servo drive features EMC filter, integrated EtherCAT interface 7-segment display with 5 buttons.,It is a motion servo drive with a rated supply voltage of 220V (three phase/single phase), an output current of 12A, nominal power of 2kW and continuous power of 2000W.,It is furnished with spring terminal electrical connection and RJ45 connectors (CN4) for EtherCAT. There is an electrical isolation between power and control.,It offers EtherCAT communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product.,Its dimensions are 62mm (width) x 184mm (depth) x 170mm (height). It weighs 1.7kg.,It is suitable for machine control solutions.,This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards.,This product is compatible with servo motor BCH2 (130mm, 4 motor stacks) at 2000W and servo motor (100mm, 2 motor stacks) at 2000W.,The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation.,Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£798.04 Exc. VAT
£957.65 Inc. VAT

Main

range of product Lexium 28
Device short name LXM28E
product or component type Motion servo drive
Format of the drive Compact housing
Line current 8.7 A 137.1 % at 220 V, three phase

Complementary

Network number of phases Three phase
[Us] rated supply voltage 200...240 V (- 10...15 %) for three phase,200...240 V (- 20...15 %) for single phase
Supply voltage limits 200…255 V three phase,170…255 V single phase
Supply frequency 50/60 Hz - 5...5 %
Network frequency 47.5...63 Hz
EMC filter Without EMC filter
Continuous output current 12 A at 8 kHz
Output current 3s peak 36 A at 220 V
Continuous power 2000 W at 220 V
Nominal power 2 kW at 220 V 8 kHz
Switching frequency 8 kHz
Overvoltage category III
Maximum leakage current 1.35 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Shielded motor cable (temperature: 0…55 °C) copper
Electrical connection Spring terminal, clamping capacity: 3.3...4 mm², AWG 12 (L1-L2),Spring terminal, clamping capacity: 3.3...4 mm², AWG 12 (R, S, T),Spring terminal, clamping capacity: 3.3...4 mm², AWG 12 (U, V, W, PE),Spring terminal, clamping capacity: 3.3...4 mm², AWG 12 (PA/+, PBe)
Discrete input number 8 programmable (CN1),2 fast capture (CN1),1 safety function STO (CN9)
Discrete input voltage 24 V DC for logic
Discrete input logic Positive or negative (CN1)
Discrete output number 5 logic output (CN1) at 12...24 V DC,1 pulse train output (PTO) (CN1)
Discrete output voltage 12...24 V DC
Discrete output logic Positive or negative (CN1)
Control signal type Servo motor encoder feedback CN2
Protection type Against reverse polarity: inputs signal,Against short-circuits: outputs signal,Overcurrent: motor,Overvoltage: motor,Undervoltage: motor,Overheating: motor,Overload: motor,Overspeed: motor
Safety function STO (safe torque off), integrated
Safety level SIL 2 conforming to IEC 61800-5-2: 2007,SIL 2 conforming to IEC 61508-1: 2010,PL d/category 3 conforming to ISO 13849-1: 2008,SIL 2 conforming to ISO 13849-1: 2009/AC,SIL 2 conforming to IEC 60204-1: 2006,SIL 2 conforming to IEC 60204-1: 2009/A1,SIL 2 conforming to IEC 60204-1: 2010/AC,SIL 2 conforming to IEC 62061: 2012
Communication interface EtherCAT, integrated
Connector type RJ45 (CN4) for EtherCAT
Method of access Slave
Transmission rate 100 Mbit/s for EtherCAT
Physical interface RS485 for Modbus Serial line slave
Status LED 1 LED (red) DC bus energized,1 LED (multi-colour) N.RUN,1 LED (multi-colour) N.ERR,2 LEDs (yellow) Link (Link Status),2 LEDs (yellow) activity
Signalling function Servo status and fault codes five 7-segment display units
marking CULus,CE,CSA
Type of cooling Natural convection
Operating position Vertical
Product compatibility Servo motor BCH2 (130 mm, 4 motor stacks) at 2000 W,Servo motor (100 mm, 2 motor stacks) at 2000 W,Servo motor (180 mm, 1 motor stacks) at 2000 W
Width 62 mm
Height 170 mm
Depth 184 mm
net weight 1.7 kg
Output current 3s peak 2 36 A at 220 V
Output current 3s peak 3 36 A at 220 V

Environment

Electromagnetic compatibility Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Standards IEC 61800-5-1
Product certifications cULus,CSA,CE
IP degree of protection IP20
Vibration resistance 3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3
Shock resistance 10 gn, type I conforming to IEC 60721-3-3
Relative humidity 5…95 % without condensation
Ambient air temperature for operation 0…55 °C
Ambient air temperature for storage -25…65 °C
Operating altitude <= 1000 m without derating,> 1000...2000 m 1 % per 100 m

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 26.0 cm
Package 1 Width 25.2 cm
Package 1 Length 9.8 cm
Package 1 Weight 1.85 kg
Unit Type of Package 2 S03
Number of Units in Package 2 3
Package 2 Height 30.0 cm
Package 2 Width 30.0 cm
Package 2 Length 40.0 cm
Package 2 Weight 6.14 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details