This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

LXM32SU60N4

LXM32SU60N4 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for LXM32SU60N4 Schneider Electric

LXM32SU60N4 Schneider Electric - Motion servo drive, Lexium 32, three phase supply voltage 208/480 V, 0.4 kW

Extended Description for LXM32SU60N4 Schneider Electric

LXM32SU60N4 Schneider Electric - This product is part of the Lexium 32 range, an offer of servo drives from 0.15kW to 7kW.,The motion servo drive features integrated EMC filter.,It offers 2 capture discrete inputs and 3 discrete outputs.,It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V, a continuous output current of 1.5A at 8kHz and a continuous power of 400W at 400V.,It is furnished with RJ45 connector (labelled CN7) for Modbus.,It offers electrical isolation between power and control. It provides Modbus and SERCOS III communication interface. It is an IP20 rated product.,Its dimensions are 68mm (width) x 237mm (depth) x 270mm (height). It weighs 1.8kg.,This product is certified by CSA. It meets EN/IEC 61800-3 standards.,This product is compatible with servo motor BSH (70mm, 1 motor stack).,Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality.,The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£637.25 Exc. VAT
£764.70 Inc. VAT

Main

range of product Lexium 32
Device short name LXM32S
product or component type Motion servo drive
Format of the drive Book
Network number of phases Three phase
[Us] rated supply voltage 200...240 V - 15...10 %,380...480 V - 15...10 %
Supply voltage limits 170…264 V,323…528 V
Supply frequency 50/60 Hz - 5...5 %
Network frequency 47.5...63 Hz
EMC filter Integrated
Continuous output current 1.5 A at 8 kHz
Output current 3s peak 6 A at 208 V for 5 s,6 A at 480 V for 5 s
maximum continuous power 400 W at 208 V,800 W at 400 V,800 W at 480 V
Nominal power 0.35 kW at 208 V 8 kHz,0.4 kW at 400 V 8 kHz,0.4 kW at 480 V 8 kHz
Line current 1.7 A 97 % at 208 V, with external line choke of 2 mH,1.8 A 108 % at 400 V, with external line choke of 2 mH,1.6 A 116 % at 480 V, with external line choke of 2 mH,1.8 A 132 % at 208 V, without line choke,1.4 A 191 % at 400 V, without line choke,1.2 A 201 % at 480 V, without line choke

Complementary

Switching frequency 8 kHz
Overvoltage category III
Maximum leakage current 30 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR
Electrical connection Terminal, clamping capacity: 3 mm², AWG 12 (CN8)
Tightening torque CN8: 0.5 N.m
Discrete input number 2 capture discrete input(s)
Discrete input type Capture (CAP terminals)
Sampling duration 0.25 ms
Discrete input voltage 24 V DC for capture
Discrete input logic Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Response time <= 5 ms compliment of STO_A, compliment of STO_B
Discrete output number 3
Discrete output type Logic output(s) (DO)24 V DC
Discrete output voltage <= 30 V DC
Discrete output logic Positive or negative (DO) conforming to EN/IEC 61131-2
Contact bounce time <= 1 ms for compliment of STO_A, compliment of STO_B
Braking current 50 mA
Response time on output 250 µs (DO) for discrete output(s)
Safety function STO (safe torque off), integrated
Safety level SIL 3 conforming to EN/IEC 61508
Communication interface Modbus, integrated,SERCOS III, integrated
Connector type RJ45 (labelled CN7) for Modbus
commissioning port 2-wire RS485 multidrop for Modbus
Transmission rate 9600, 19200, 38400 bps for bus length of 40 m for Modbus
Number of addresses 1…247 for Modbus
Status LED 1 LED (red) servo drive voltage
Signalling function Display of faults 7 segments
marking CE
Operating position Vertical +/- 10 degree
Product compatibility Servo motor BMH (70 mm, 1 motor stacks)
Width 68 mm
Height 270 mm
Depth 237 mm
net weight 1.8 kg

Environment

Electromagnetic compatibility Conducted EMC conforming to EN 55011 class A group 1
Standards EN/IEC 61800-3
Product certifications CSA
IP degree of protection IP20 conforming to EN/IEC 60529
Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to EN/IEC 60028-2-27
Pollution degree 2 conforming to EN/IEC 61800-5-1
Environmental characteristic Classes 3C1 conforming to IEC 60721-3-3
Relative humidity Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
Ambient air temperature for operation 0…50 °C conforming to UL
Ambient air temperature for storage -25…70 °C
Type of cooling Natural convection
Operating altitude <= 1000 m without derating

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 10.6 cm
Package 1 Width 27.5 cm
Package 1 Length 33 cm
Package 1 Weight 2.403 kg
Unit Type of Package 2 S03
Number of Units in Package 2 2
Package 2 Height 30 cm
Package 2 Width 30 cm
Package 2 Length 40 cm
Package 2 Weight 5.646 kg
Unit Type of Package 3 P06
Number of Units in Package 3 16
Package 3 Height 60 cm
Package 3 Width 80 cm
Package 3 Length 60 cm
Package 3 Weight 52.652 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details