MTN6005-0011

MTN6005-0011 Schneider Electric - SpaceLogic KNX - air quality sensor - Temp/Hum/CO²/Pressure - 4E binary/1E ana

MTN6005-0011 Schneider Electric - This KNX CO2 humidity, temperature and atmospheric pressure sensor has a user interface and allows you to modify the temperature setpoint.,It is combined and allows the measurement of CO2, temperature and humidity (relative) and atmospheric pressure.,In addition, it has 5 inputs: 2 binary, 1 can be configured as binary or analog, 2 can be configured Used as binary or as a temperature sensor (PT1000, 10kΩ PTC, 2-/10-/12 -/15-/33-/47 kΩ NTC).,It is used to monitor the quality of the air in meeting rooms, offices, schools/kindergartens, passive or low-energy houses and living spaces without controlled ventilation.,The CO2 content air quality is a verifiable indicator of ambient air quality. The higher the CO2 content, the worse the room air.,The sensor provides the following data and controls for KNX: CO2, relative humidity, temperature, dew point e, atmospheric pressure, VAV control, temperature regulator.,Associated with the right actuators, it provides perfect ventilation and temperature control.,The functions of the KNX software are CO2 control/sensor, relative humidity, temperature, temperature/dew point alarm, air pressure sensor, VAV control for 2 blocks.,There are 2 independent measurement value thresholds for CO2, atmospheric pressure and temperature, a threshold for relative humidity., Actions are taken if the thresholds are not reached or if they are exceeded. Different settings can be selected for the two different blocks for VAV control. The device allows CO2 calibration via bus. Power supply is via bus voltage. The current consumption of the bus is max. 10mA. Ambient temperature should be between -5°C-+50°C.,CO2 measuring range is 390-5000 ppm, humidity 0%-100%, atmospheric pressure risk from 300 hPa to 1100 hPa, temperature, between 0°C and +50°C. It is classified IP20 according to DIN EN 60529.,It is polar white.