This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

MTN647895

MTN647895 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for MTN647895 Schneider Electric

MTN647895 Schneider Electric - Switch actuator REG-K/8x230/16 w. manual mode and current detection, light grey

Extended Description for MTN647895 Schneider Electric

MTN647895 Schneider Electric - For independent switching of loads via make contacts. The actuator has integrated current detection that measures the load current on each channel.,All 230 V switch outputs can be operated with manual switches. With integrated bus coupling unit. A green LED indicates that the device is ready for operation once the application has been loaded.,The load is connected with screw terminals. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. a data rail is not necessary.,Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning.,Delay functions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central function with delay. Parameterisation for bus voltage failure and recovery.,Behaviour for download. Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value monitoring.,Flash function. Nominal voltage: 230 V AC, 50-60 Hz. DC 12-24 V ±10%, 0.1-16 A. For each switching contact: Switching current: 16 A, cos Phi 0.6.,AC1 operation: max. 16 A. AC3 operation: max. 10 A. AC5 operation: max. 16 A. DC current switching capacity: max. 16 A/ 24 V DC.,Output life endurance: Mechanical: >1000000. AC1/AC3/AC5 operation: >3x10000. 230V, 1A resistive: >8x100000.,Incandescent lamps: 230 V AC, max. 3600 W. Halogen lamps: 230 V AC, max. 2500 W. Fluorescent lamps: 230 V AC, max. 2500 VA, with parallel compensation.,Capacitive load: 230 V AC, 16 A, max. 200 µF. Minimum switching performance: 100 mA/12 V AC/DC. Maximum peak inrush-current: 150µs: 600 A. 250µs: 480 A. 600µs: 300 A.,Current detection load current: Detection range: 0.1 A to 16 A (sine effective value or direct current). Detection accuracy: +/- 8% of the present current value (sine) and +/- 100 mA.,Frequency: 50/60 Hz with alternating voltage. Display: 100 mA.,Device width: 8 modules, approx. 144 mm. Contents: With bus connecting terminal and cable cover. Colour: light grey. 8 channel device

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£348.49 Exc. VAT
£418.19 Inc. VAT

Main

range of product KNX
product or component type Switch actuator
Operating mode Manual
Bus type KNX
Modular device additional info Connectable with different phases
Number of contacts 8

Complementary

Function available Current detection
Total number of 18 mm modules 8
mounting support DIN rail
[Ue] rated operational voltage 100...240 V
Network frequency 50...60 Hz
[In] rated current 0.1…16 A
Load type Incandescent lamps: <= 3600 W, 230 V AC,Halogen lamps: <= 2500 W, 230 V AC,Incandescent lamps: <= 1600 W, 100 V AC,Incandescent lamps: <= 3840 W, 240 V AC,Halogen lamps: <= 1086 W, 100 V AC,Halogen lamps: <= 2608 W, 240 V AC,Parallel compensated fluorescent lamp: <= 1086 VA, 100 V AC,Parallel compensated fluorescent lamp: <= 2500 VA, 230 V AC,Parallel compensated fluorescent lamp: <= 2608 VA, 240 V AC,Capacitive: , 16 A, 200 µF, 100...240 V AC,Motor: <= 434 W, 100 V AC,Motor: <= 1000 W, 230 V AC,Motor: <= 1043 W, 240 V AC

Environment

IP degree of protection IP20

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8.200 cm
Package 1 Width 12.600 cm
Package 1 Length 28.000 cm
Package 1 Weight 718.000 g
Unit Type of Package 2 CAR
Number of Units in Package 2 6
Package 2 Height 19.500 cm
Package 2 Width 30.700 cm
Package 2 Length 40.200 cm
Package 2 Weight 4.686 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details