This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

NSYPTDS3

NSYPTDS3 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for NSYPTDS3 Schneider Electric

NSYPTDS3 Schneider Electric - PanelSeT - Flush Mounting drive installation kit - Altivar Process size S3 - IP55

Extended Description for NSYPTDS3 Schneider Electric

NSYPTDS3 Schneider Electric - Flush mounting kit for variable speed drives in PanelSeT SFN, and PanelSeT SM and S3D electrical enclosures.,It has nominal height and width of 555 and 295 mm respectively.,This installation kit allows a quick and efficient installation, while isolating the hot part.,It has IP55 ingress protection thanks to the polyurethane seal.,Earth continuity is ensured by tightening the M6 nuts combined with pin washers.,It is made of steel with epoxy polyester powder finish in RAL 7035 grey color.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£173.59 Exc. VAT
£208.31 Inc. VAT

Main

Range PanelSeT
product or component type Drive flush mounting kit
accessory category Mounting and fixing accessory
Product specific application Process and utilities
Range compatibility Altivar variable speed drive ATV630,Altivar variable speed drive ATV930,PanelSeT SF and SM enclosures: H:>=600 mm x W:>=300 mm,PanelSeT S3D enclosure: H:>=600 mm x W:>=300 mm
compatibility for Altivar Process 630-930, size: 3
Motor power kW 7.5 kW 220/240 V,11 kW 220/240 V,15 kW 380/480 V,18.5 kW 380/480 V,22 kW 380/480 V
Mounting location Mode 1: back of enclosure on mounting plate,Mode 2: inside enclosure
Kit composition 1 x mounting plate with flanges and integrated gasket, steel with anti-corrosive coating. Fixing by screws and nuts,1 x fixing accessories,1 x drilling template,1 x instruction sheet,1 x edge protector profile, plastic.

Complementary

Permanent permissible load 14.3 kg
Colour Grey (RAL 7035)
Height External: 555 mm,Cut-out: 503 mm
Width External: 295 mm,Cut-out: 250 mm
Depth Wall-enclosure separation : 22 mm
net weight 2.452 kg
Services Configuration of enclosurepre-drilled back at requested dimensions ,Factory installation drive flush mounting kit on enclosure

Environment

IP degree of protection IP55 conforming to IEC 60529

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 5.000 cm
Package 1 Width 37.000 cm
Package 1 Length 57.000 cm
Package 1 Weight 2.452 kg
Unit Type of Package 2 PAM
Number of Units in Package 2 30
Package 2 Height 50.000 cm
Package 2 Width 100.000 cm
Package 2 Length 120.000 cm
Package 2 Weight 87.000 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

CAD

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details