This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

RM0PAS101

RM0PAS101 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for RM0PAS101 Schneider Electric

RM0PAS101 Schneider Electric - insulation control relay - for AS-Interface cabling system - 29.5..31.6 V DC

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£269.30 Exc. VAT
£323.16 Inc. VAT

Main

range of product AS-Interface cabling system
product or component type Insulation control relay
Additional information Supplied with an impedance adaptor
Supply Via AS-Interface line
Number of outputs 2 relay (1 NO)

Complementary

[Ue] rated operational voltage 29.5...31.6 V DC for measuring input,50 V DC for output relay
Average consumption in mA 50 mA at 30 V
Response time < 20 ms opening of relay contacts for measuring input,< 5 ms AS-Interface communication interrupt for measuring input
Input detection threshold < 15 kOhm for AS-i + Earth,< 7 kOhm for AS-i - Earth
[Ith] conventional free air thermal current 5 A at 24 V
[In] rated current 2 A at 13 V, U/R = 10 ms,5 A at 12 V
Current consumption 13 mA at 24 V for test input and reset input
Voltage state 1 guaranteed > 11 V for test input and reset input
Current state 1 guaranteed >= 5 mA (test input and reset input)
Voltage state 0 guaranteed < 5 V for test input and reset input
Current state 0 guaranteed <= 2 mA (test input and reset input)
[Ui] rated insulation voltage 2000 V between terminals and mounting rails
Installation category II conforming to IEC 60664
Fixing mode Clip-on (35 x 15 mm symmetrical DIN rail on chassis),Clip-on (35 x 15 mm symmetrical DIN rail on mounting plate),Clip-on (35 x 7.5 mm symmetrical DIN rail on chassis)
Electrical connection Screw terminal block, clamping capacity: 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16, flexible with cable end,Screw terminal block, clamping capacity: 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14, flexible without cable end,Screw terminal block, clamping capacity: 1 x 0.14...1 x 4 mm² AWG 26...AWG 12, solid,Screw terminal block, clamping capacity: 2 x 0.09...2 x 0.75 mm² AWG 28...AWG 20, flexible with cable end,Screw terminal block, clamping capacity: 2 x 0.2...2 x 2.5 mm² AWG 24...AWG 14, solid
Tightening torque 0.6 N.m with flat Ø 3.5 mm screwdriver
Width 90 mm
Height 76 mm
Depth 58 mm
Local signalling 1 LED (green) for output relays energised,1 LED (green) for reset input at state 1,1 LED (green) for supply to relay on and no fault present,1 LED (red) for insulation fault, polarity AS-Interface -,1 LED (red) for insulation fault, polarity AS-Interface +,1 LED (yellow) for test input at state 1
net weight 0.26 kg

Environment

Product certifications AS-Interface No 16701
Standards IEC 61131-2 Type 2,EN/IEC 60204-2,EN/IEC 60204-1
IP degree of protection IP2X conforming to IEC 60529
Resistance to incandescent wire 750 °C, extinction time <30 s conforming to IEC 60695-2-1
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance 0.7 gn (f= 5…100 Hz) conforming to IEC 60068-2-6
Resistance to electrostatic discharge 6 kV on contact conforming to IEC 61000-4-2,8 kV in open air conforming to IEC 61000-4-2
Resistance to radiated fields 15 V/m, radio frequency fields = 80…1000 Hz conforming to IEC 61000-4-3
Resistance to fast transients 1 kV on the inputs conforming to IEC 61000-4-4,2 kV AS-Interface conforming to IEC 61000-4-4
Ambient air temperature for operation -5…60 °C
Ambient air temperature for storage -25…70 °C
Pollution degree 2 conforming to IEC 60654

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details