This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

SH30401P16A2000

SH30401P16A2000 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for SH30401P16A2000 Schneider Electric

SH30401P16A2000 Schneider Electric - servo motor SH3 040 0,21Nm,key,single,no brake,90°conn,IP54/IP65,9k RPM

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£794.41 Exc. VAT
£953.29 Inc. VAT

Main

Range compatibility PacDrive 3
Device short name SH3.....P
product or component type Servo motor

Complementary

Maximum mechanical speed 9000 rpm
[Us] rated supply voltage 115...480 V
Network number of phases Three phase
Continuous stall current 1.12 A
Continuous stall torque 0.21 N.m at 115...480 V three phase
Continuous power 170 W
Peak stall torque 0.75 N.m at 480 V three phase
Nominal output power 77 W at 115 V single phase,77 W at 230 V single phase,166 W at 400 V three phase,166 W at 480 V three phase
Nominal torque 0.176 N.m at 115 V single phase,0.176 N.m at 230 V single phase,0.184 N.m at 400 V three phase,0.184 N.m at 480 V three phase
Nominal speed 4000 rpm at 115 V single phase,4000 rpm at 230 V single phase,9000 rpm at 400 V three phase,9000 rpm at 480 V three phase
Maximum current Irms 4.5 A
Shaft end Parallel key
Shaft diameter 8 mm
Shaft length 25 mm
Key width 3 mm
IP degree of protection IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5,IP65 motor: conforming to EN/IEC 60034-5,IP65 shaft bushing: conforming to EN/IEC 60034-5
Encoder type Absolute single turn SinCos Hiperface
Speed feedback resolution 16 periods
Holding brake Without
mounting support International standard flange
Motor flange size 40 mm
Electrical connection Rotatable right angled connector
Torque constant 0.19 N.m/A at 120 °C
Back emf constant 13.6 V/krpm at 20 °C
Number of motor poles 5
Rotor inertia 0.0232 kg.cm²
Stator resistance 17.2 Ohm
Stator inductance 14.6 mH
Type of cooling Natural convection
Length 73.4 mm
Centring collar diameter 30 mm
Centring collar depth 2.5 mm
Number of mounting holes 4
Mounting holes diameter 4.5 mm
Circle diameter of the mounting holes 46 mm
net weight 0.4 kg

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 11.0 cm
Package 1 Width 24.0 cm
Package 1 Length 17.0 cm
Package 1 Weight 627.0 g

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details