This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

SH32053P11A2000

SH32053P11A2000 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for SH32053P11A2000 Schneider Electric

SH32053P11A2000 Schneider Electric - servo motor SH3 205 94,4Nm,key,single,nobrake,90°conn.IP54/IP65,3.8k RPM

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£11,396.74 Exc. VAT
£13,676.09 Inc. VAT

Main

Range compatibility PacDrive 3
Device short name SH3.....P
product or component type Servo motor

Complementary

Maximum mechanical speed 3800 rpm
[Us] rated supply voltage 115...480 V
Network number of phases Three phase
Continuous stall current 33.2 A
Continuous stall torque 94.4 N.m at 115...480 V three phase
Continuous power 10600 W
Peak stall torque 330 N.m at 115...480 V three phase
Nominal output power 4450 W at 115 V single phase,7790 W at 230 V single phase,10620 W at 400 V three phase,10100 W at 480 V three phase
Nominal torque 84.9 N.m at 115 V single phase,74.4 N.m at 230 V single phase,50.7 N.m at 400 V three phase,40.2 N.m at 480 V three phase
Nominal speed 500 rpm at 115 V single phase,1000 rpm at 230 V single phase,2000 rpm at 400 V three phase,2400 rpm at 480 V three phase
Maximum current Irms 136.1 A
Shaft end Parallel key
Shaft diameter 38 mm
Shaft length 80 mm
Key width 10 mm
IP degree of protection IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5,IP65 motor: conforming to IEC 60034-5,IP65 shaft bushing: conforming to IEC 60034-5
Encoder type Absolute single turn SinCos Hiperface
Speed feedback resolution 128 periods
Holding brake Without
mounting support International standard flange
Motor flange size 205 mm
Electrical connection Straight connector
Torque constant 2.76 N.m/A at 120 °C
Back emf constant 172 V/krpm at 20 °C
Number of motor poles 5
Rotor inertia 190 kg.cm²
Stator resistance 0.2 Ohm
Stator inductance 6.3 mH
Maximum radial force Fr 4500 N at 1000 rpm,3570 N at 2000 rpm,3120 N at 3000 rpm
Maximum axial force Fa 740 N
Type of cooling Natural convection
Length 489 mm
Centring collar diameter 180 mm
Centring collar depth 4 mm
Number of mounting holes 4
Mounting holes diameter 14 mm
Circle diameter of the mounting holes 215 mm
net weight 67 kg

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 41.0 cm
Package 1 Width 31.0 cm
Package 1 Length 72.0 cm
Package 1 Weight 71.1 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details