This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

STBDDI3420K

STBDDI3420K Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for STBDDI3420K Schneider Electric

STBDDI3420K Schneider Electric - standard digital input kit STB - 24 V DC - 4 I

Extended Description for STBDDI3420K Schneider Electric

STBDDI3420K Schneider Electric - This input kit is part of the Modicon STB range, an offer of modular distributed I/O.,This standard digital input kit is an accessory kit for Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC).,It includes a digital input module, an STB base, one spring clamp connector, and one screw type connector.,Setting can be done via Advantys STB configuration software.,It weighs 0.11kg.,The kit includes STBXBA1000 base, STBDDI3420 module, STBXTS2100 6-terminal spring clamp connector, and STBXTS1100 6-terminal screw type connector.,The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a primary controller via a bus or communication network.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£54.04 Exc. VAT
£64.85 Inc. VAT

Main

range of product Modicon STB distributed I/O solution
product or component type Standard digital input kit
Kit composition STBXTS2100, 6-terminal spring clamp connector,STBDDI3420 module,STBXTS1100, 6-terminal screw type connector,STBXBA1000 base
Discrete input number 4
Discrete input voltage 24 V
Discrete input voltage type DC

Complementary

Input voltage limits 11...30 V at state 1,-3...5 V at state 0
Permissible voltage 30 V
Absolute maximum voltage 56 V 1.3 ms
Discrete input current 8 mA
Current state 0 guaranteed <= 1.2 mA
Current state 1 guaranteed >= 2.5 mA
Discrete input logic Positive or negative
Response time 0.925 ms off-to-on 0.5 ms,1.35 ms on-to-off 0.5 ms
Protection type Power protection integrated fuse on PDM time lag 10 A,Input protection resistor-limited,Reverse polarity protection
Insulation between channels and logic bus 1500 V for 1 minute
Cold swapping Yes
hot swapping Yes for standard NIMs
Input filtering 1 ms,2 ms,4 ms,8 ms,0.5 ms,16 ms +/- 0.25 ms
Current supplied by sensor 100 mA per channel
Product compatibility I/O base STBXBA1000,Power distribution module STBPDT3100/3105
[Us] rated supply voltage 24 V DC
Supply Power distribution module
Current consumption 45 mA at 5 V DC for logic bus
marking CE
Overvoltage category II
Status LED 1 LED (green) module status (RDY),1 LED per channel (green) channel status (IN1 to IN4),1 LED (red) module error (ERR)
Depth 65.1 mm
Height 18.4 mm
Width 125 mm
net weight 0.111 kg

Environment

Standards IEC 61131-2 Type 1
Product certifications CSA,FM Class 1 Division 2,UL
Pollution degree 2 conforming to IEC 60664-1
Operating altitude <= 2000 m
IP degree of protection IP20 conforming to IEC 61131-2 class 1
Ambient air temperature for operation -25…70 °C (without derating)
Ambient air temperature for operation 32...140 °F without derating
Ambient air temperature for storage -40…85 °C without derating
Ambient air temperature for storage -40...185 °F without derating
Relative humidity 95 % at 60 °C without condensation
Vibration resistance 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail,5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail,+/-0.35 mm at 10…58 Hz
Shock resistance 30 gn for 11 ms conforming to IEC 88 reference 2-27

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 2.5 cm
Package 1 Width 8.0 cm
Package 1 Length 13.0 cm
Package 1 Weight 131.0 g
Unit Type of Package 2 S02
Number of Units in Package 2 28
Package 2 Height 15.0 cm
Package 2 Width 30.0 cm
Package 2 Length 40.0 cm
Package 2 Weight 4.094 kg
Unit Type of Package 3 PAL
Number of Units in Package 3 448
Package 3 Height 60.0 cm
Package 3 Width 80.0 cm
Package 3 Length 448.0 cm
Package 3 Weight 59.584 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details