This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

TM2AMO1HT

TM2AMO1HT Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for TM2AMO1HT Schneider Electric

TM2AMO1HT Schneider Electric - Analog output module, Modicon M238 logic controller, 1 output voltage/current, 1 screw terminal block

Extended Description for TM2AMO1HT Schneider Electric

TM2AMO1HT Schneider Electric - This analog output module is part of the range Modicon TM2 expansion modules.,It consists one analog output, 0V to 10V or 4mA to 20 mA with 12 bits resolution.,It is equipped with one removable screw terminal block and can be mounted on a symmetrical DIN rail 35 mm.,It is compatible with Modicon OTB interface modules, Magelis HMI controller XBTGC and Modicon / Twido controllers.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£563.68 Exc. VAT
£676.41 Inc. VAT

Main

range of product Modicon M238 logic controller
product or component type Analog output module
Analogue output number 1
Analogue output type Current: 4...20 mA,Voltage: 0...10 V

Complementary

Range compatibility Advantys OTB,Twido
Analogue output resolution 12 bits
LSB value 2.5 mV voltage voltage,4.8 µA current current
Load type Resistive
Load impedance ohmic >= 2000 Ohm voltage,<= 300 Ohm current
Stabilisation time 10 ms
Conversion time 10 ms + 1 controller cycle time
Measurement error +/- 0.2 % of full scale at 25 °C
Temperature coefficient +/-0.015 %FS/°C
Repeat accuracy +/-0.5 %FS
Non-linearity +/- 0.2 %FS
Output ripple <= 1 LSB
Total error +/-1 %FS
type of cable Twisted shielded cable
Insulation between channel and internal logic Photocoupler
Supply External supply
[Us] rated supply voltage 24 V DC
Supply voltage limits 19.2…30 V
Electrical connection 1 removable screw terminal block
Current consumption 50 mA at 5 V DC internal,40 mA at 24 V DC external
net weight 0.085 kg

Environment

Dielectric strength 500 V between the I/O and the external supply circuit,500 V between the I/O and internal logic
Width 23.5 mm
Depth 70 mm
Height 90 mm

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 7.3 cm
Package 1 Width 10.3 cm
Package 1 Length 12.5 cm
Package 1 Weight 196.0 g

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

CAD

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details