This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

VW3A3403

VW3A3403 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for VW3A3403 Schneider Electric

VW3A3403 Schneider Electric - encoder interface card with open collector outputs - 12 V DC

Extended Description for VW3A3403 Schneider Electric

VW3A3403 Schneider Electric - This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors.,It can also be used for Vector Control operation with speed feedback for synchronous motors.,It improves drive performance irrespective of the motor load state.,It is compatible with open collector outputs encoder technology.,This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive.,It is protected against encoder supply short circuits and overloads.,It is compatible with Altivar 61 and Altivar 71.

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£2.10 Exc. VAT
£2.52 Inc. VAT

Main

range of product Altivar
product or component type Encoder interface card
Range compatibility Altivar 61,Altivar Lift,Altivar Process Modular,Altivar 61Q,Altivar 71Q,Altivar 71
Discrete output type Open collector
[Us] rated supply voltage 12 V DC (voltage limits: 12…13 V)
Number of pulses per revolution 10000 for ATV71H......383,5000 for all ATV61 drives,5000 for ATV71H...M3,5000 for ATV71H...M3X,5000 for ATV71H...N4

Complementary

Maximum supply current 0.175 A
Protection type Short-circuit protection,Overload protection
Maximum cable distance between devices 500 m
Maximum operating frequency 300 kHz
Input signal A,B,Compliment of A,Compliment of B/AB/A
input impedance 1 kOhm
Electrical connection Terminal, connection capacity: 0.2 mm² (AWG 24) <100 m cable length, encoder, 100 mA at 10 V,Terminal, connection capacity: 0.5 mm² (AWG 20) <100 m cable length, encoder, 175 mA at 10 V,Terminal, connection capacity: 0.5 mm² (AWG 20) <200 m cable length, encoder, 100 mA at 10 V,Terminal, connection capacity: 0.75 mm² (AWG 18) <200 m cable length, encoder, 175 mA at 10 V,Terminal, connection capacity: 1 mm² (AWG 17) <500 m cable length, encoder, 100 mA at 10 V,Terminal, connection capacity: 1.5 mm² (AWG 15) <500 m cable length, encoder, 175 mA at 10 V
net weight 0.2 kg

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 7.4 cm
Package 1 Width 23.0 cm
Package 1 Length 16.6 cm
Package 1 Weight 142.0 g
Unit Type of Package 2 S03
Number of Units in Package 2 7
Package 2 Height 30.0 cm
Package 2 Width 30.0 cm
Package 2 Length 40.0 cm
Package 2 Weight 1.581 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

Instruction sheet

Catalogue

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details