This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

XPSMC16ZP

XPSMC16ZP Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for XPSMC16ZP Schneider Electric

XPSMC16ZP Schneider Electric - safety controller XPS-MC - 24 V DC - 16 input - 32 LEDs signalling

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£921.73 Exc. VAT
£1,106.08 Inc. VAT

Main

range of product Preventa Safety automation
product or component type Configurable safety controller
Safety module name XPSMC
Safety use category Category 4 maximum conforming to EN 954-1/EN/ISO 13849-1,PLE maximum conforming to ISO 13849-1,SIL 3 maximum conforming to IEC 61508
Type of start Configurable
Standards EN 1760-1/ISO 13856-1,EN 574/ISO 13851,IEC 60947-5-1,IEC 61508,IEC 60204-1,EN 954-1/EN/ISO 13849-1,IEC 61496-1
Product certifications UL,CSA,TÜV
[Us] rated supply voltage 24 V DC - 20...20 %
Number of inputs 16
Communication port protocol Modbus with 1 RJ45 port(s), serial link, transmission rate: 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps,Profibus with 1 SUB-D 9-pin female port(s), serial link, transmission rate: 12 Mbps
Safety level Can reach PL e/category 4 conforming to EN 954-1/EN/ISO 13849-1,Can reach SIL 3 conforming to IEC 61508

Complementary

Function of module Dynamic monitoring of hydraulic valves on linear presses,Eccentric press,Emergency stop monitoring, with or without time delay, 1 or 2-channel wiring,Enabling switch monitoring, 2 or 3 contacts,Foot switch monitoring,Guard monitoring for injection presses and blowing machines,Guard monitoring with 1 or 2 limit switches,Hydraulic press,Magnetic switch monitoring category 4 conforming to EN/IEC 61496,Monitoring safety stop at top dead centre on eccentric press category 3 conforming to EN 574/ISO 13851,Muting function of light curtains,Position selector,Safety mat monitoring,Safety time delays,Shaft/chain breaking monitor,Zero speed detection,Light curtain monitoring category 4 conforming to IEC 61496,Two-hand control category 3 conforming to EN 574/ISO 13851
Synchronisation time between inputs Depending on configuration selected
Power consumption in W 12 W
Input protection type External fuse 16 A
[Uc] control circuit voltage 28.8 V
Maximum line resistance 100 Ohm <2000 m
Output type 2 relays, 2 NO contacts (4 NO total) circuit(s),Solid state, 6 circuit(s), volt-free
Breaking capacity 180 VA holding AC-15 C300 relay output,1800 VA inrush AC-15 C300 relay output
Breaking capacity 2 A at 24 V for static output circuit,1.5 A at 24 V (DC-13) time constant: 50 ms for relay output
Output thermal current 4 A for both outputs simultaneously,6 A for 1 output and 2 A for the other for relay output
[Ith] conventional free air thermal current 16 A for relay output,6.5 A for static output circuit
Associated fuse rating 16 A gL for power supply,4 A gL for relay output,6 A fast blow for relay output
Minimum output current 10 mA for relay output
Minimum output voltage 17 V for relay output
Response time Configurable : 20 ms or 30 ms with software XPSMCWIN
[Ui] rated insulation voltage 300 V (pollution degree 2) conforming to IEC 60647-5-1, DIN VDE 0110 part 1
[Uimp] rated impulse withstand voltage 4 kV overvoltage category III conforming to IEC 60647-5-1, DIN VDE 0110 part 1
Method of access Slave
Exchange size 14 words
Number of addresses 1…125 for Profibus,1…247 for Modbus
Parity Even for Modbus,No for Modbus,Odd for Modbus
Data format 1 start bit/8 data bits,1 stop bit even or odd,2 stop bits without parity,RTU (Remote Terminal Unit) mode
Supported modbus function 01: 8-bit output data/32-bit input data,02: 32-bit input data/8-bit output data,03: information and errors
Local signalling 32 LEDs
mounting support Mounting plate
Depth 153 mm
Height 151.5 mm
Width 74 mm
net weight 0.82 kg

Environment

IP degree of protection IP20 conforming to IEC 60529
Ambient air temperature for operation -10…55 °C
Ambient air temperature for storage -25…85 °C

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 9.000 cm
Package 1 Width 18.000 cm
Package 1 Length 26.000 cm
Package 1 Weight 1.270 kg
Unit Type of Package 2 S04
Number of Units in Package 2 6
Package 2 Height 30.000 cm
Package 2 Width 40.000 cm
Package 2 Length 60.000 cm
Package 2 Weight 8.430 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details