This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Schneider Electric

XPSMF3DIO8801

XPSMF3DIO8801 Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for XPSMF3DIO8801 Schneider Electric

XPSMF3DIO8801 Schneider Electric - Preventa safety remote mixed I/O module - 8 I not isolated - 10 O not isolated

Free Delivery to UK Mainland on orders over £25

Main

range of product Preventa Safety automation
product or component type Preventa safety remote mixed I/O module
Safety module name XPSMF3
Safety module application Extension of I/O capacity
Safety use category Category 4 maximum conforming to EN 954-1,Performance level e conforming to EN/ISO 13849-1,SIL 3 conforming to EN/IEC 61508
Function of module Monitoring safety actuators for discrete input,Monitoring safety actuators for discrete output,Monitoring safety detection for discrete input,Monitoring safety dialogue for discrete input,Monitoring safety dialogue for discrete output,Monitoring short-circuit and line break for line control outputs
[Us] rated supply voltage 24 V DC - 15...20 %
Supply SELV or PELV conforming to EN/IEC 60950
Discrete input number 8 not isolated discrete input(s)
Number of outputs 2 not isolated for line control outputs
Discrete output number 10, not isolated
Structure type 10BASE-T/100BASE-TX

Complementary

Response time Depending on size of application
Associated fuse rating 10 A, slow-blow
Voltage state 0 guaranteed <= 5 V for discrete input
Voltage state 1 guaranteed 15...< 30 V for discrete input
Current state 0 guaranteed 1.25...1.5 mA (discrete input)
Current state 1 guaranteed <= 2 mA (discrete input)
Discrete input voltage 20 V
Discrete input current 100 mA
Input protection type Protected against short-circuit
Output voltage 20 V line control outputs
Nominal output current 60 mA for line control outputs
Switching voltage 7.5 V for discrete input
Discrete output voltage 24 V DC
Output voltage tolerance +/- 2 %
Discrete output current 1 A at 60 °C (channels 1 and 2),1 A at 60 °C (channels 4 and 8),2 A at 40 °C (channels 4 and 8),0.5 A at 60 °C (channels 1 to 3 and 5 to 7),<= 7 A (all channels)
Inductive load 500 mH for discrete output
Maximum tungsten load <10 W, channels 1 to 3 and 5 to 7 for discrete output, <25 W, channels 1 and 2 for discrete output, <25 W, channels 4 and 8 for discrete output
Minimum load 2 mA per channel
Maximum leakage current 1 mA, at 2 V at state 0 for discrete output
Communication port protocol Safe Ethernet with 2 RJ45 port(s), transmission rate: 100 Mbps, 10 Mbps, medium: dual twisted pair cable, category 5D or better
Exchange mode Half duplex, full duplex, autonegotiation
Number of terminal blocks 1 for power supply,2 for discrete input,2 for discrete output,2 for line control outputs
Current consumption 8 A at 24 V DC on power supply
mounting support 35 mm symmetrical DIN rail
Depth 66.5 mm
Height 109 mm
Width 152 mm
net weight 1 kg

Environment

IP degree of protection IP20
Ambient air temperature for operation 0…60 °C
Ambient air temperature for storage -40…85 °C

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 16.5 cm
Package 1 Width 18.5 cm
Package 1 Length 30.0 cm
Package 1 Weight 1.556 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Catalogue

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details