This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Siemens

3TK2853-2BB40-0AB1

3TK2853-2BB40-0AB1 Siemens

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for 3TK2853-2BB40-0AB1 Siemens

3TK2853-2BB40-0AB1 Siemens - !!! Phased-out product !!! SIGUARD safety combination Electronic basic unit STOP-0, Maximum achieved SIL:3, PL:E STOP-0, 6 EC, 1 HL Signaling circuit, 1NC Spring-type terminal 24 V DC Customer type (KRAUSS-MAFFEI) Width 90 mm

Free Delivery to UK Mainland on orders over £25

Product

Article Number (Market Facing Number) 3TK2853-2BB40-0AB1
Product Description !!! Phased-out product !!! SIGUARD safety combination Electronic basic unit STOP-0, Maximum achieved SIL:3, PL:E STOP-0, 6 EC, 1 HL Signaling circuit, 1NC Spring-type terminal 24 V DC Customer type (KRAUSS-MAFFEI) Width 90 mm
Product family Not available
Product Lifecycle (PLM) PM490:Start of final year of support
PLM Effective Date Product discontinued since: 01.10.2020
Notes Product was deleted without replacement If you need assistance please contact our local Siemens office

Delivery information

Export Control Regulations ECCN : N / AL : N
Estimated dispatch time (Working Days) On request
Net Weight (kg) 0,794 Kg
Packaging Dimension 136,50 x 188,00 x 110,50
Package size unit of measure MM
Quantity Unit 1 Piece
Packaging Quantity 1

Additional Product Information

EAN 4011209593367
UPC 754554951157
Commodity Code 85364900
LKZ_FDB/ CatalogID CC-IC10
Product Group 5837
Group Code R711
Country of origin Germany
Compliance with the substance restrictions according to RoHS directive Since: 01.05.2012
Product class C: products manufactured / produced to order, which cannot be reused or re-utilised or be returned against credit.
WEEE (2012/19/EU) Take-Back Obligation Yes
REACH Art. 33 Duty to inform according to the current list of candidates Lead monoxide (lead ... CAS-No. 1317-36-8 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead monoxide (lead oxide) Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation. | Lead titanium zircon... CAS-No. 12626-81-2 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead titanium zirconium oxide Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.
SCIP number

Product Function

Suitability For Use
Monitoring Of Floating Sensors Yes
Monitoring Of Non-Floating Sensors Yes
Position Switch Monitoring Yes
Emergency-Off Circuit Monitoring Yes
Valve Monitoring No
Opto-Electronic Protection Device Monitoring Yes
Tactile Sensor Monitoring Yes
Magnetically Operated Switch Monitoring No
Proximity Switch Monitoring No
Safety Switch Yes
Safety-Related Circuits Yes

General Technical Data

Certificate Of Suitability Ul Approval Yes
Insulation Voltage Rated Value 690 V
Surge Voltage Resistance Rated Value 6 000 V
Protection Class Ip
Of The Enclosure Ip20
Of The Terminal Ip20
Shock Resistance 5G / 11 Ms
Vibration Resistance According To Iec 60068-2-6 5 ... 500 Hz: 0,075 Mm
Operating Frequency Maximum 1 000 1/H
Mechanical Service Life (Operating Cycles) Typical 30 000 000
Substance Prohibitance (Date) 05/01/2012
Svhc Substance Name Lead Monoxide (Lead Oxide) - 1317-36-8
Lead Titanium Zirconium Oxide - 12626-81-2
Weight 0.794 Kg

Ambient Conditions

Installation Altitude At Height Above Sea Level Maximum 2 000 M
Ambient Temperature
During Operation -25 ... +60 °C
During Storage -40 ... +80 °C
Relative Humidity During Operation 10 ... 95 %
Air Pressure According To Sn 31205 90 ... 106 Kpa

Electromagnetic Compatibility

Emc Emitted Interference Iec 60947-5-1, Iec 60000-4-3, Iec 60000-4-5, Iec 60000-4-6

Safety Related Data

Stop Category According To Iec 60204-1 0
Iec 62061
Pfhd With High Demand Rate According To Iec 62061 1.1E-8 1/H
Iso 13849
Category According To En Iso 13849-1 4
Iec 61508
Safety Integrity Level (Sil)
According To Iec 61508 3
Safety Device Type According To Iec 61508-2 Type B
Hardware Fault Tolerance According To Iec 61508 1
T1 Value For Proof Test Interval Or Service Life According To Iec
6150820 A
Electrical Safety
Touch Protection Against Electrical Shock Finger-Safe
Short-Circuit Protection
Design Of The Fuse Link For Short-Circuit Protection Of The No
Contacts Of The Relay Outputs Requiredgl/Gg: 10 A
Inputs
Number Of Sensor Inputs
1-Channel Or 2-Channel 1
Outputs
Switching Capacity Current Of The No Contacts Of The Relay
Outputs At Dc-13
At 24 V 10 A
At 115 V 1 A
At 230 V 0.3 A
Switching Capacity Current Of The No Contacts Of The Relay
Outputs At Ac-15
At 115 V 6 A
At 230 V 6 A
Switching Capacity Current Of The Nc Contacts Of The Relay
Outputs At Dc-13
At 24 V 10 A
At 115 V 1 A
At 230 V 0.3 A
Switching Capacity Current Of The Nc Contacts Of The Relay
Outputs At Ac-15
At 115 V 6 A
At 230 V 6 A
Wire Length Between Sensor And Electronics Evaluation
Device With Cu 1.5 Mm² And 150 Nf/Km Maximum2 000 M
Times
Make Time With Automatic Start
Typical 60 Ms
At Dc Maximum 100 Ms
Make Time With Automatic Start After Power Failure
Typical 6 000 Ms
Maximum 7 000 Ms
Make Time With Monitored Start
Typical 60 Ms
Maximum 100 Ms
Backslide Delay Time After Opening Of The Safety Circuits
Typical50 Ms
Backslide Delay Time In The Event Of Power Failure
Typical 120 Ms
Maximum 120 Ms
Recovery Time After Opening Of The Safety Circuits Typical 500 Ms
Recovery Time After Power Failure Typical 7 S
Pulse Duration
Of The Sensor Input Minimum 45 Ms
Of The On Pushbutton Input Minimum 0.2 S
Of The Cascading Input Minimum 0.045 S
Control Circuit/
Type Of Voltage Of The Control Supply Voltage Dc
Control Supply Voltage 1 At Dc Rated Value 24 V
Operating Range Factor Control Supply Voltage Rated Value Of
Magnet Coil At Dc
Initial Value 0.85
Full-Scale Value 1.1
Installation/ Mounting/ Dimensions
Mounting Position Any

Connections/ Terminals

Type Of Electrical Connection Spring-Loaded Terminals
Type Of Connectable Conductor Cross-Sections
Solid 1X (0.2 ... 2.5 Mm²)
Finely Stranded Without Core End Processing 1X (0.25 ... 1.5 Mm²)
For Awg Cables Solid 1X (24 ... 18)
For Awg Cables Stranded 1X (24 ... 18)
Connectable Conductor Cross-Section
Solid 0.2 ... 2.5 Mm²
Finely Stranded Without Core End Processing 0.25 ... 1.5 Mm²
Awg Number As Coded Connectable Conductor Cross
Section
Solid 24 ... 18
Stranded 24 ... 18
Dc Resistance Of The Cable Maximum 500 Ω

Documentation

Downloads

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details