This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Siemens

6AG1138-6DB00-2BB1

6AG1138-6DB00-2BB1 Siemens

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for 6AG1138-6DB00-2BB1 Siemens

6AG1138-6DB00-2BB1 Siemens - SIPLUS ET 200SP TM pulse 2x24V based on 6ES7138-6DB00-0BB1 with conformal coating, -40…+60 °C, PWM and pulse output 2 channels 2 A for proportional valves and DC motors

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Fetching stock
2 - 4 W.Weeks

£566.56 Exc. VAT
£679.87 Inc. VAT

Product

Article Number (Market Facing Number) 6AG1138-6DB00-2BB1
Product Description SIPLUS ET 200SP TM pulse 2x24V based on 6ES7138-6DB00-0BB1 with conformal coating, -40…+60 °C, PWM and pulse output 2 channels 2 A for proportional valves and DC motors
Product family SIPLUS TM Pulse 2x24V pulse output module
Product Lifecycle (PLM) PM300:Active Product

Delivery information

Export Control Regulations AL : N / ECCN : EAR99H
Estimated dispatch time (Working Days) 45 Day/Days
Net Weight (kg) 0,064 Kg
Packaging Dimension 6,70 x 7,80 x 3,00
Package size unit of measure CM
Quantity Unit 1 Piece
Packaging Quantity 1

Additional Product Information

EAN 4047618068936
UPC 804766353383
Commodity Code 85389091
LKZ_FDB/ CatalogID A&DSE/SIP ADD
Product Group 4257
Group Code R151
Country of origin Germany
Compliance with the substance restrictions according to RoHS directive Since: 08.09.2015
Product class B: return restricted, please contact your Siemens partner/contact
WEEE (2012/19/EU) Take-Back Obligation Yes
REACH Art. 33 Duty to inform according to the current list of candidates Lead CAS-No. 7439-92-1 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation. | 4,4'-isopropylidened... CAS-No. 80-05-7 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): 4,4'-isopropylidenediphenol (Bisphenol A, BPA) Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.
SCIP number

Product Function

I&M Data Yes; I&M 0
Isochronous Mode Yes
Engineering With
Step 7 Tia Portal Configurable/Integrated From Version See Entry Id: 109746275

Supply Voltage

Load Voltage L+
Rated Value (Dc) 24 V
Permissible Range, Lower Limit (Dc) 19.2 V
Permissible Range, Upper Limit (Dc) 28.8 V
Short-Circuit Protection Yes
Reverse Polarity Protection Yes; Against Destruction
Input Current
Current Consumption, Max. 70 Ma; Without Load
Encoder Supply
Number Of Outputs 2; A Common 24V Encoder Supply For Both Channels
24 V Encoder Supply
24 V Yes; L+ (-0.8 V)
Short-Circuit Protection Yes; Per Module, Electronic
Output Current, Max. 300 Ma
Power Loss
Power Loss , Typ. 1.7 W
Address Area
Address Space Per Module
Inputs 16 Byte; 8 Per Channel
Outputs 24 Byte; 12 Per Channel
Digital Inputs
Number Of Digital Inputs 2; 1 Per Channel
Digital Inputs, Parameterizable Yes
Input Characteristic Curve In Accordance With Iec 61131, Type 3 Yes
Digital Input Functions, Parameterizable
Freely Usable Digital Input Yes
Hw Enable For Digital Output Yes
Input Voltage
Type Of Input Voltage Dc
Rated Value (Dc) 24 V
For Signal "0" -30 To +5 V
For Signal "1" +11 To +30V
Permissible Voltage At Input, Min. -30 V
Permissible Voltage At Input, Max. 30 V
Input Current
For Signal "1", Typ. 2.5 Ma
Input Delay (For Rated Value Of Input Voltage)
For Standard Inputs
— Parameterizable Yes; None / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 Ms
— At "0" To "1", Min. 4 Μs; For Parameterization "None"
— At "1" To "0", Min. 4 Μs; For Parameterization "None"
Digital Outputs
Type Of Digital Output P- And M-Switching
Number Of Digital Outputs 2; 1 Per Channel
Current-Sinking Yes
Current-Sourcing Yes
Digital Outputs, Parameterizable Yes
Short-Circuit Protection Yes; Electronic/Thermal
Response Threshold, Typ. 6.8 A With Standard Output, 2 A With High Speed Output
Limitation Of Inductive Shutdown Voltage To -0.8 V
Control Ling A Digital Input Yes
Accuracy Of Pulse Duration ±100 Ppm ±0.5 Μs With High Speed Output, ±100 Ppm ±9 Μs With Standard
Output
Minimum Pulse Duration 1.5 Μs; With High Speed Output, 10 Μs With Standard Output
Digital Output Functions, Parameterizable
Freely Usable Digital Output Yes
Pwm Output Yes
— Number, Max. 2; 1 Per Channel
— Cycle Duration, Parameterizable Yes; Max. 85 S
— On Period, Min. 0 %
— On Period, Max. 100 %
— Resolution Of The Duty Cycle 0.0036 %; For S7 Analog Format, Min. 20 Ns
Connection Of A Proportional Valve Yes
Dithering Yes
— Frequency Adjustable Yes
— Amplitude Adjustable Yes
Current Measurement Yes
Current Control Yes
Connection Of A Dc Motor Yes
On-Delay Yes
Off-Delay Yes
Frequency Output Yes
Pulse Train Yes
Pulse Output Yes
Switching Capacity Of The Outputs
With Resistive Load, Max. 2 A
On Lamp Load, Max. 10 W; 1 W With High Speed Output
Load Resistance Range
Lower Limit 12 Ω; 240 Ohm With High Speed Output
Upper Limit 12 Kω
Output Voltage
Type Of Output Voltage Dc
For Signal "0", Max. 1 V
For Signal "1", Min. 23.2 V; L+ (-0.8 V)
Output Current
For Signal "1" Rated Value 2 A; 0.1 A With High Speed Output, Observe Derating
Output Delay With Resistive Load
"0" To "1", Typ. 0 Μs; With High Speed Output, 4.5 Μs With Standard Output
"0" To "1", Max. 0.8 Μs; With High Speed Output, 9 Μs With Standard Output
"1" To "0", Typ. 0 Μs; With High Speed Output, 4.5 Μs With Standard Output
"1" To "0", Max. 0.8 Μs; With High Speed Output, 9 Μs With Standard Output
Parallel Switching Of Two Outputs
For Uprating Yes
Switching Frequency
With Resistive Load, Max. 100 Khz; With High Speed Output, 10 Khz With Standard Output
With Inductive Load, Max. 100 Khz; With High Speed Output, 10 Khz With Standard Output
On Lamp Load, Max. 10 Hz
Total Current Of The Outputs
Current Per Channel, Max. 2 A
Current Per Group, Max. 4 A
Current Per Module, Max. 4 A
Isochronous Mode
Bus Cycle Time (Tdp), Min. 250 Μs; With 1 Channel Configuration, 375 Μs With 2 Channel Configuration
Jitter, Max. 1 Μs; Typically ±
Interrupts/Diagnostics/Status Information
Diagnostics Function Yes
Substitute Values Connectable Yes; Parameterizable
Alarms
Diagnostic Alarm Yes
Diagnoses
Monitoring The Supply Voltage Yes
Short-Circuit Yes
Diagnostics Indication Led
Monitoring Of The Supply Voltage (Pwr-Led) Yes; Green Pwr Led
Channel Status Display Yes
For Module Diagnostics Yes; Green/Red Diag Led
Integrated Functions
Counter No
Potential Separation
Potential Separation Channels
Between The Channels No
Between The Channels And Backplane Bus Yes
Permissible Potential Difference
Between Different Circuits 75 V Dc/60 V Ac (Base Isolation)
Isolation
Isolation Tested With 707 V Dc (Type Test)
Standards, Approvals, Certificates
Suitable For Safety Functions No

Ambient Temperature During Operation

Horizontal Installation, Min. -40 °C; = Tmin (Incl. Condensation/Frost)
Horizontal Installation, Max. 60 °C; = Tmax; +70 °C With Spacing Modules (6Ag1193-6Bn00-7Ba0) Or
Configured Slots To The Left And Right Of The Module
Vertical Installation, Min. -40 °C; = Tmin (Incl. Condensation/Frost)
Vertical Installation, Max. 50 °C; Observe Derating
Altitude During Operation Relating To Sea Level
Installation Altitude Above Sea Level, Max. 5 000 M
Ambient Air Temperature-Barometric Pressure-Altitude Tmin ... Tmax At 1 140 Hpa ... 795 Hpa (-1 000 M ... +2 000 M) // Tmin ... (Tmax
- 10 K) At 795 Hpa ... 658 Hpa (+2 000 M ... +3 500 M) // Tmin ... (Tmax -20 K)
At 658 Hpa ... 540 Hpa (+3 500 M ... +5 000 M)
Relative Humidity
With Condensation, Tested In Accordance With Iec 60068-
2-38, Max.100 %; Rh Incl. Condensation / Frost (No Commissioning In Bedewed State),
Horizontal Installation
Resistance
Coolants And Lubricants
— Resistant To Commercially Available Coolants And
Lubricantsyes; Incl. Diesel And Oil Droplets In The Air
Use In Stationary Industrial Systems
— To Biologically Active Substances According To En Yes; Class 3B2 Mold, Fungus And Dry Rot Spores (With The Exception Of Fauna);
60721-3-3 Class 3B3 On Request
— To Chemically Active Substances According To En
60721-3-3Yes; Class 3C4 (Rh < 75 %) Incl. Salt Spray Acc. To En 60068-2-52 (Severity
Degree 3); *
— To Mechanically Active Substances According To En
60721-3-3Yes; Class 3S4 Incl. Sand, Dust, *
— Against Mechanical Environmental Conditions Acc.
To En 60721-3-3Yes; Class 3M8 Using The Siplus Mounting Kit Et 200Sp (6Ag1193-6Aa00-
0Aa0)
Use On Ships/At Sea
— To Biologically Active Substances According To En
60721-3-6Yes; Class 6B2 Mold And Fungal Spores (Excluding Fauna); Class 6B3 On
Request
— To Chemically Active Substances According To En
60721-3-6Yes; Class 6C3 (Rh < 75 %) Incl. Salt Spray Acc. To En 60068-2-52 (Severity
Degree 3); *
— To Mechanically Active Substances According To En
60721-3-6Yes; Class 6S3 Incl. Sand, Dust; *
— Against Mechanical Environmental Conditions Acc.
To En 60721-3-6Yes; Class 6M4 Using The Siplus Mounting Kit Et 200Sp (6Ag1193-6Aa00-
0Aa0)
Usage In Industrial Process Technology
— Against Chemically Active Substances Acc. To En
60654-4Yes; Class 3 (Excluding Trichlorethylene)
— Environmental Conditions For Process, Measuring
And Control Systems Acc. To Ansi/Isa-71.04Yes; Level Gx Group A/B (Excluding Trichlorethylene; Harmful Gas
Concentrations Up To The Limits Of En 60721-3-3 Class 3C4 Permissible); Level
Lc3 (Salt Spray) And Level Lb3 (Oil)
Remark
— Note Regarding Classification Of Environmental
Conditions Acc. To En 60721, En 60654-4 And
Ansi/Isa-71.04* The Supplied Plug Covers Must Remain In Place Over The Unused Interfaces
During Operation!
Conformal Coating
Coatings For Printed Circuit Board Assemblies Acc. To En
61086Yes; Class 2 For High Reliability
Protection Against Fouling Acc. To En 60664-3 Yes; Type 1 Protection
Military Testing According To Mil-I-46058C, Amendment 7 Yes; Discoloration Of Coating Possible During Service Life
Qualification And Performance Of Electrical Insulating
Compound For Printed Board Assemblies According To Ipc-
Cc-830Ayes; Conformal Coating, Class A
Decentralized Operation
To Simatic S7-300 Yes
To Simatic S7-400 Yes
To Simatic S7-1200 Yes
To Simatic S7-1500 Yes
To Standard Profibus Master Yes
To Standard Profinet Controller Yes

Dimensions

Width 20 Mm
Height 73 Mm
Depth 58 Mm
Weight S
Weight , Approx. 50 G

Documentation

Downloads

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details