This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Siemens

6ES7146-5FF00-0BA0

6ES7146-5FF00-0BA0 Siemens

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for 6ES7146-5FF00-0BA0 Siemens

6ES7146-5FF00-0BA0 Siemens - SIMATIC DP, ET 200AL, F-DI 4+F-DQ 2x24VDC/2A, 4xM12, PROFIsafe, up to PL e (ISO 13849), Up to SIL 3 (IEC 61508), Degree of protection IP67

Free Delivery to UK Mainland on orders over £25

Direct from Manufacturer

Fetching stock
2 - 4 W.Weeks

£384.04 Exc. VAT
£460.85 Inc. VAT

Product

Article Number (Market Facing Number) 6ES7146-5FF00-0BA0
Product Description SIMATIC DP, ET 200AL, F-DI 4+F-DQ 2x24VDC/2A, 4xM12, PROFIsafe, up to PL e (ISO 13849), Up to SIL 3 (IEC 61508), Degree of protection IP67
Product family Fail-safe I/O modules
Product Lifecycle (PLM) PM300:Active Product

Delivery information

Export Control Regulations AL : N / ECCN : N
Estimated dispatch time (Working Days) 1 Day/Days
Net Weight (kg) 0,251 Kg
Packaging Dimension 5,50 x 17,70 x 5,20
Package size unit of measure CM
Quantity Unit 1 Piece
Packaging Quantity 1

Additional Product Information

EAN 4047623410997
UPC 195125201095
Commodity Code 85389091
LKZ_FDB/ CatalogID ST76
Product Group 4B83
Group Code R152
Country of origin Germany
Compliance with the substance restrictions according to RoHS directive Since: 12.10.2020
Product class A: Standard product which is a stock item could be returned within the returns guidelines/period.
WEEE (2012/19/EU) Take-Back Obligation Yes
REACH Art. 33 Duty to inform according to the current list of candidates Lead CAS-No. 7439-92-1 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation. | Lead monoxide (lead ... CAS-No. 1317-36-8 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead monoxide (lead oxide) Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation. | Silicic acid, lead s... CAS-No. 11120-22-2 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Silicic acid, lead salt Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation. | 2-methyl-1-(4-methyl... CAS-No. 71868-10-5 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): 2-methyl-1-(4-methylthiophenyl)-2-morpholinopropan-1-one Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation. | 2,2',6,6'-tetrabromo... CAS-No. 79-94-7 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.
SCIP number

Product Function

I&M Data Yes; I&M0 To I&M3
Engineering With
Step 7 Tia Portal Configurable/Integrated From Version Step 7 V17 Or Higher
Operating Mode
Di Yes
Dq Yes

Supply Voltage

Rated Value (Dc) 24 V
Power Supply According To Nec Class 2 Required No
Load Voltage 1L+
Rated Value (Dc) 24 V
Permissible Range, Lower Limit (Dc) 20.4 V
Permissible Range, Upper Limit (Dc) 28.8 V
Reverse Polarity Protection Yes; Against Destruction
Load Voltage 2L+
Rated Value (Dc) 24 V
Permissible Range, Lower Limit (Dc) 20.4 V
Permissible Range, Upper Limit (Dc) 28.8 V
Reverse Polarity Protection Yes; Against Destruction; Outputs Applied With Reversed Polarity For Loads
Connected Between M-Switch And 2L+ Will Conduct
Input Current
Current Consumption (Rated Value) 55 Ma (1L+) / 40 Ma (2L+); Without Load
From Load Voltage 1L+ (Unswitched Voltage) 4 A; Maximum Value
From Load Voltage 2L+, Max. 4 A; Maximum Value
Encoder Supply
Number Of Outputs 2
24 V Encoder Supply
Short-Circuit Protection Yes; Per Load Voltage, Electronic (Response Threshold 0.7 A To 1.7 A)
Output Current, Max. 1 A; Total Current Of All Encoders, Max. 0.5 A Per Load Voltage; Maximum Of 2.0
V Drop
Power Loss
Power Loss , Typ. 4.7 W
Address Area
Address Space Per Module
Inputs 8 Byte
Outputs 6 Byte
Digital Inputs
Number Of Digital Inputs 4
Input Characteristic According To Iec 61131 Type 1
Number Of Simultaneously Controllable Inputs
All Mounting Positions
— Up To 55 °C, Max. 4
Input Voltage
Rated Value (Dc) 24 V
For Signal "0" -30 To +5 V
For Signal "1" +15 To +30 V
Input Current
For Signal "1", Typ. 4.85 Ma
Input Delay (For Rated Value Of Input Voltage)
For Standard Inputs
— Parameterizable Yes
— At "0" To "1", Min. 0.8 Ms
— At "0" To "1", Max. 12.8 Ms
— At "1" To "0", Min. 0.8 Ms
— At "1" To "0", Max. 12.8 Ms
Cable Length
Unshielded, Max. 30 M
Digital Outputs
Number Of Digital Outputs 2
In Groups Of 2
Short-Circuit Protection Yes; Per Channel, Electronic
Response Threshold, Typ. 10 A; Measured At M-Switch, Threshold For P-Switch Is Higher
Open-Circuit Detection Yes; Per Channel, Only Detects When Output Is Off
Overload Protection Yes
Response Threshold, Typ. 3.4 A; Measured At P-Switch
Limitation Of Inductive Shutdown Voltage To P-Switch: -26 V Dc Referenced To 2M, M-Switch: +48 V Dc Referenced To 2M
Switching Capacity Of The Outputs
On Lamp Load, Max. 10 W
Load Resistance Range
Lower Limit 12 Ω
Upper Limit 2 Kω
Output Voltage
For Signal "1", Min. L+ (-2.0 V), P-Switch Is L+ (-1.5 V), M-Switch Is 0.5 V
Output Current
For Signal "1" Rated Value 2 A
For Signal "0" Residual Current, Max. 0.5 Ma
Switching Frequency
With Resistive Load, Max. 30 Hz
With Inductive Load, Max. 0.1 Hz
On Lamp Load, Max. 10 Hz
Total Current Of The Outputs
Current Per Group, Max. 4 A
Cable Length
Unshielded, Max. 30 M
Encoder
Connectable Encoders
2-Wire Sensor No
— Permissible Quiescent Current (2-Wire Sensor), Max. 0.5 Ma
Interrupts/Diagnostics/Status Information
Substitute Values Connectable No
Alarms
Diagnostic Alarm Yes; Parameterizable
Diagnoses
Monitoring The Supply Voltage Yes
Wire-Break Yes; Outputs When Off
Short-Circuit Yes; Inputs, Outputs, Encoder Supply
Diagnostics Indication Led
Channel Status Display Yes; Green Led
For Channel Diagnostics Yes; Red Led
For Module Diagnostics Yes; Green/Red Led
For Load Voltage Monitoring Yes; Green Led
Potential Separation
Between The Load Voltages Yes
Potential Separation Channels
Between The Channels, In Groups Of 4 Di Channels Are Isolated From 2 Dq Channels
Between The Channels And Backplane Bus Yes
Between The Channels And The Power Supply Of The
Electronicsdi Channels Are Non-Isolated From Supply Voltage 1L+ And Dq Channels Are
Isolated From The Supply Voltage 1L+
Isolation
Isolation Tested With 707 V Dc (Type Test)
Degree And Class Of Protection
Ip Degree Of Protection Ip65/67
Standards, Approvals, Certificates
Highest Safety Class Achievable In Safety Mode
Performance Level According To Iso 13849-1 Pld (Di Single-Channel), Ple (Di Two-Channel, Dq)
Category According To Iso 13849-1 Cat. 3 (Di Single-Channel), Cat. 4 (Di Two-Channel, Dq)
Sil Acc. To Iec 61508 Sil 2 (Di Single-Channel), Sil 3 (Di Two-Channel, Dq)
Probability Of Failure (For Service Life Of 20 Years And Repair Time Of 100 Hours)
— Low Demand Mode: Pfdavg In Accordance With
Sil2< 1.00E-03 Di Single-Channel; < 1.00E-03 Dq With Dark Test Disabled
— Low Demand Mode: Pfdavg In Accordance With
Sil3< 1.00E-05 Di Two-Channel; < 2.00E-05 Dq With Dark Test Enabled
— High Demand/Continuous Mode: Pfh In Accordance
With Sil2< 1.00E-08 1/H Di Single-Channel; < 1.00E-07 1/H Dq With Dark Test Disabled
— High Demand/Continuous Mode: Pfh In Accordance
With Sil3< 1.00E-09 1/H Di Two-Channel; < 1.00E-08 1/H Dq With Dark Test Enabled

Ambient Temperature During Operation

Min. -30 °C
Max. 55 °C
Connection Method
Design Of Electrical Connection For The Inputs And Outputs M12, 5-Pole
Design Of Electrical Connection For Supply Voltage M8, 4-Pin
Et-Connection
Et-Connection M8, 4-Pin, Shielded

Dimensions

Width 45 Mm
Height 159 Mm
Depth 40 Mm
Weight S
Weight , Approx. 220 G

Documentation

Downloads

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details