This webshop is for business use only (B2B) – Orders accepted from registered companies and organisations only. Company details required at checkout.

Siemens

6FX2001-5QN13

6FX2001-5QN13 Siemens

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for 6FX2001-5QN13 Siemens

6FX2001-5QN13 Siemens - absolute encoder 6FX2001-5QN13 single-turn 16-bit with PROFINET operating voltage 10-30 V clamp flange shaft 10 mm plug M12 radial FS15 maximum ambient temperature 85 °C

Free Delivery to UK Mainland on orders over £25

Product

Article Number (Market Facing Number) 6FX2001-5QN13
Product Description absolute encoder 6FX2001-5QN13 single-turn 16-bit with PROFINET operating voltage 10-30 V clamp flange shaft 10 mm plug M12 radial FS15 maximum ambient temperature 85 °C
Product family Absolute encoders with PROFINET IO
Product Lifecycle (PLM) PM300:Active Product

Delivery information

Export Control Regulations AL : N / ECCN : N
Estimated dispatch time (Working Days) 45 Day/Days
Net Weight (kg) 0,500 Kg
Package size unit of measure Not available
Quantity Unit 1 Piece
Packaging Quantity 1

Additional Product Information

EAN Not available
UPC 040892936858
Commodity Code 90314990
LKZ_FDB/ CatalogID NCZ
Product Group 9310
Group Code R220
Country of origin Germany
Compliance with the substance restrictions according to RoHS directive Since: 29.11.2011
Product class C: products manufactured / produced to order, which cannot be reused or re-utilised or be returned against credit.
WEEE (2012/19/EU) Take-Back Obligation Yes
REACH Art. 33 Duty to inform according to the current list of candidates Lead CAS-No. 7439-92-1 > 0, 1 % (w / w) Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w): Lead Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.
SCIP number

Electrical Data

Operating Voltage Up Dc 10 … 30 V
Interface Profinet Io With Rt / Irt
Clock Input 2 Ports Irt
Data Output 2 Ports Irt
Short-Circuit Strength Yes
Transmission Rate 100 Mbit/S
Connection2 X Connector M12, 4-Pin For Profinet /
Ethernet /Ip Ports, 1 X Connector M12, 4-
Pin For Operating Voltage, Radial
Resolution 16 Bit
Telegramaccording To Pno Encoder Profile V4.1
Class 1, Class 2, Class 3, Class 4
Standard Frame 81 To 89, Siemens
Frames 860/862
Code Type
Sampling Gray
Transmission Binary, Profinet / Ethernet/Ip
Parameterizability
Preset Yes
Counting Direction Yes
Resolution Per Revolution Any 1 ... 8192
Total Resolution Any 1 ... 8192
Speed Signal Yes
Limit Switch No
Clock Synchronism Yes
Slave-To-Slave Communication No
Accuracy± 79 " (± 1 Lsb At 8192 Steps Or
(± 2 Lsb At 65136 Steps)
Friction Torque (At 20°C) ≤ .01
Starting Torque (At 20°C) ≤ .01

Mechanical Data

Speed Max.
With ± 1 Lsb Accuracy 5,800 Rpm
Mechanical 12,000 Rpmload Capacity
N ≤ 6000 Rpm
- Axial 40 N
- Radial At Shaft End 110 N
N > 6000 Rpm
- Axial 10 N
- Radial At Shaft End 20 N
Shaft Diameter 10 Mm
Shaft Length 20 Mm
Angular Acceleration, Max. 100,000 Rad/S²
Rotor Moment Of Inertia 0.0000019 Kgm²
Vibration And Shock
Vibration (55...2000 Hz) According To
En 60068-2-6, Max100 M/S²
6 Ms According To En 60068-2-27,
Max1,000 M/S²
Degree Of Protection
Without Shaft Input Ip67
With Shaft Input Ip64
Net Weight 0.4 Kg
Ambient Temperature
During Operation -40 … 85 °C

Standards

Compliance With Standards Ce, Culus
Emc Class Filteremc Directive 2014/30/Ec And
Regulations Of Emc Directives (Generic
)

Documentation

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible